Filter

Industry & Category

Country

Brand

Model

Condition

Year

Price

Hours

cat mini excavator

We’ve found 4 products you may like

Clocked meters. The oldest in used iron. We see it all the time; listings that filter out by Year, Condition and Hours appear to be clean. They are not.

The problem with the structure is this. This means that the MachDealers filter set allows buyers to see Year, Price and Hours as sorting levers. Useful. Until all those data points break down the time the hour-meter has been wound back. A 2020 unit with one thousand (1,000) hours on the clock in 2020 may have consumed four thousand (4,000) hours’ worth of wear. It doesn’t show you anything on the gauge. The ECU is telling you all you need to know.

We are directly connected to the ECU. We download the life time recall fault code memory. Engine load factor measurements are cross checked against meter reading. If the difference is > 12% between the ECU’s logged cycles and the dashboard hours then the ECU has been rolled back. Walk away.

Units cannot have the same amount of exposure. Risk weight takes off model year position.

2020 CAT 303.5E. The oldest of the units in a collection. The field experience was gained over a 6-year period. Likely to be the meter(s) likely to be rolled back in any mixed age inventory. All units for VINs in 2020 are considered suspect until they have been cleared for use based on ECU data.

2022 CAT 305.5E2 and 2022 Caterpillar 307.5. Same production year. Duty cycle bracket various(s). Just because a piece was listed in a year doesn’t necessarily make it the same wear year. We’re drawing samples of oil from both. Separately. No inter unit cross referencing.

2026 CAT 307E2 Compact Crawler Excavator

2025 CAT 305.5. The Most recent unit within the set. Decrease the chances of manipulation, or decrease the risk of manipulation, by lower probability. Not by assumption. Portion of same use for demo is returned to the contractor and causes an additional compaction of the wear cycles. We verify regardless.

There is one unit hard fact that is shared between all four units. Actual operating environment is not specified on this page by Country filter. The undercarriage is degraded at documented rates greater than normal utility cycles for the urban environment at sandy quarry cycles. The remaining wear state on the terrain that is not known is not quantifiable.

Komatsu excavator final drive motor and steel tracks in good condition at construction yard.

No exceptions. These thresholds are price fixed, no seller negotiation.

  • If ECU lifetime hours exceeds the number on the meter by > 12%, reject.

  • If hydraulic pressure decay failure occurs on one circuit = reject.

  • Any unit (over 24 months) without original service records = reject.
  • Seller does not agree to provide access to ECU = reject. Immediately.
  • Exceeding the OEM published Link Pitch Wear = reject.

MachDealers features these four on surfaces in a Brands,/Models, Condition and Hours filter. These are sorting tools used to filter. They are not inspection reports – We run our own. Every time. No exceptions.

The Reject Cascade

Data sources for the table above:https://www.ironplanet.com/return-policy