2019 Komatsu PC350LC Crawler Excavator
Condition:Used
Hours:2600
Country:United Kingdom
Overview
| Brand | Komatsu |
|---|---|
| Model | PC350LC |
| Country | United Kingdom |
| Year | 2019 |
| Hours | 2600 |
| Operating Weight | 35 Tons |
| Bucket Capacity | 1.6m³ |
| Condition | Used |
| Supplier Name | GAP Group Limited (GAP Hire Solutions) |
Product Description
Taking advantage of the fine weather today, I was inspecting a newly arrived batch of excavators at the yard and came across this Komatsu PC350LC in excellent condition. I ran it for 15 minutes or so without any smoke from the stack and temp maintained as per normal, the radiator fins look fine and there isn’t anything too much dust into it. Hydraulics were smooth and boom and arms movements were consistency, no jerking or hesitation when you’re feathering controls; bucket curled back nice and strong and no rod scoring on the cylinders when they were extended fully – wait I should check some pictures…. Yeh, it appears chrome on the arm cylinder was fairly clean and didn’t notice any rod scoring on the cylinder. I’m surprised seat’s are still covered, joysticks still have that film on them, even saw a red flag tied to one of the levers, presumably for transport or storage: cab’s still wrapped in plastic. There’s floor mats, no mud all caked in the floor, all the windows are in tact and the upper guard is installed, which some guys take off.
Surface rust is normal on rollers, idlers do not appear to have weeping oil, some teeth are worn down on rollers, but there is still material on them. Really since I rented an identical machine to it, the bottom end performed better than I thought it would it would be ripping rock full day for Honestly for a rental fleet machine the undercarriage held up better than I thought it would the way that Honestly construction must’ve been running it, on decent ground not just ripping rock all day. When I put my head in the engine bay, the bay doesn’t show any oil mist on the firewall, the pump area looks clean, and the hoses have the spiral wrap, and are not cracked or seeping. The sun was shining during inspection which did help as I was able to see everything. There was also no leaking fluid from the hydraulic tank under the steps of the cab. Fine no gouges counter weight paint. Machine digs well. No play.If anyone can view it as a used buy, I would say the undercarriage cost may be 2 yrs down the road depends on how hard they are the keys to the engine and hydraulics would seem to be fine at the moment cab is pretty much new on the interior, it’s odd and that isn’t a big deal.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | Komatsu |
| Model | PC350LC |
| Exterior Paint | Good |
| Body Panels | Good |
| Decals | Present |
| Safety Labels | Present |
| Rental Sticker | Present |
| Cabin Glass | Good |
| Door | Good |
| Seat | New |
| Floor Mat | Good |
| Roof Liner | Good |
| Controls | Good |
| Monitor | Present |
| Pedals | Good |
| Fire Extinguisher | Present |
| Red Flag | Present |
| Boom | Good |
| Stick | Good |
| Bucket | Used |
| Bucket Teeth | Worn |
| Pins | Good |
| Hydraulic Cylinders | Good |
| Hoses | Good |
| Tracks Left | Worn |
| Tracks Right | Worn |
| Track Frame | Good |
| Idlers | Good |
| Sprockets | Good |
| Rollers | Good |
| Track Pads | Worn |
| Track Pins | Used |
| Engine Cover | Good |
| Engine | Good |
| Air Filter | Good |
| Radiator | Dirty |
| Hydraulic Pump | Good |
| Main Control Valve | Good |
| Hydraulic Lines | Good |
| Hose Clamps | Present |
| Swing Motor | Good |
| Travel Motors | Good |
| Oil Leak | No |
| Coolant Leak | No |
| Hydraulic Leak | No |
| Fuel Leak | No |
| Overall Condition | Good |
| Ready For Work | Yes |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Good, new seat |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok, bit dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Engine & Performance | Engine Cooling System | Ok, radiator dirty |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Good, muddy |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used, good |
| Exterior Condition & Visual Inspection | Bumpers & Catwalk Condition | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used, good |
| Exterior Condition & Visual Inspection | Lights | Present |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good, some fading |
| Hydraulic System | Hydraulic Leaks | No visible leaks |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Shoe Width | 600mm |
| Tracks Estimated Remaining Life % | Type | Steel |
| Tracks Estimated Remaining Life % | Grouser Height | Low |
| Tracks Estimated Remaining Life % | Track Frame | Ok |
| Tracks Estimated Remaining Life % | Idler Condition | Ok |
| Tracks Estimated Remaining Life % | Sprocket Condition | Ok |
| Tracks Estimated Remaining Life % | Rollers Condition | Ok |
Estimated Price
$51,200.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
GAP Group Limited (GAP Hire Solutions)
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.