2014 Komatsu PC210LC Crawler Excavator
Condition:Used
Hours:1600
Country:Saudi Arabia
Overview
| Brand | Komatsu |
|---|---|
| Model | PC210LC |
| Country | Saudi Arabia |
| Year | 2014 |
| Hours | 1600 |
| Operating Weight | 22 Tons |
| Bucket Capacity | 1.1 m³ |
| Condition | Used |
| Supplier Name | Yusuf Bin Ahmed Kanoo (Kanoo Machinery) |
Product Description
The sun is scorching today. I inspected this PC210LC excavator in the yard; it’s parked between two wheel loaders on a bed of crushed stone. I don’t know, I popped the hood to see if it was leaking like all the Komatsu Hydraulic excavators do, but actually it’s dry, the valve cover is clean, no puddling around the pump or filter housing and the hose leading to the air intake boot isn’t cracked, which is unusual for machines that operate. Started it up and no smoking at idle, no rattles or knocks at idle, turbo spoofer when you give it some throttle, so that is fine, but powertrain does not give me any indication of how many hours it has on it as I couldn’t access the display and was in some menu which I didn’t bother with). Super quick hydraulic response, no stick lag when cycling sticks, boom lift is strong, arm speed for the bucket curl is good and swing motor doesn’t lag or hesitate, pins / bushings up front move a little, but not enough for an operating machine to be alarming.
Normally it would be the undrcon said “burning place” but not this one. No cracks in the steel in links (that I could see); the sprockets have teeth left on them; the idlers are not wobbling; the rollers spin freely and don’t grind. It’s not ready for a rebuild but it’s not new either. Dirt on top of door handles, in the pedals and everywhere on the floor, headliner has some stains like somebody used to eat his lunch up there every day although nobody knows why the seat still has the speaker plastic cover which is bizarre, I believe to get the photos. Operator’s water bottle was still jammed in the cup holder. There are no board cracks, all the switches click when tested, no wobbly glasses or joysticks. The exterior paint has been factory Komatsu yellow and the blue stripes are still in place on the counter weight, but there are no big dents or collision damage only usual scuffed dents and incipient surface rust on the tracks. After tweaking it around the house for a couple days with no problems, walked it twice with no leaks below. I would buy it if it wasn’t so expensive, but it’s not a risk mechanically at all.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | Komatsu |
| Model | PC210LC |
| Paint | Good |
| Body | Clean |
| Cab Glass | Clean |
| Seat | New |
| Seat Cover | Present |
| Control Levers | Good |
| Pedals | Good |
| Cab Ceiling | Clean |
| Safety Belt | Present |
| Cab Door | Good |
| Boom | Good |
| Arm | Good |
| Bucket | Good |
| Bucket Teeth | Present |
| Hydraulic Hoses | Good |
| Cylinders | Good |
| Tracks | Good |
| Track Pads | Good |
| Sprockets | Good |
| Idlers | Good |
| Rollers | Good |
| Undercarriage | Clean |
| Engine Cover | Removed |
| Engine Block | Visible |
| Cylinder Head | Clean |
| Intake Manifold | Present |
| Air Hose | Good |
| Cooling Hoses | Present |
| Wiring Harness | Good |
| Warning Labels | Present |
| Counterweight | Good |
| Swing Motor | Present |
| Travel Motors | Present |
| Exhaust Pipe | Good |
| Fuel Cap | Good |
| Hydraulic Tank | Good |
| Air Filter | Good |
| Radiator | Good |
| Leaks | No |
| Rust | No |
| Damage | No |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present, faded |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No, pin type |
| Key Features & Condition | Hydraulic Hammer Lines | Present |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Seat and Arm Support | New, plastic wrap still on |
| Operator Cabin Details | Cab Doors & covers | Good, clean |
| Operator Cabin Details | Control Levers, Control Stick | Good condition |
| Operator Cabin Details | Windows and Mirrors | Clean, no cracks |
| Operator Cabin Details | Cab Floor Covering | Clean |
| Operator Cabin Details | Cab Structure, Guard | Ok, standard roof |
| Operator Cabin Details | Engine Model | Komatsu original |
| Engine & Performance | Engine Cooling System | Hoses ok |
| Engine & Performance | Exhaust System & Muffler | Good |
| Engine & Performance | Belts & Air/Oil Filters | Visible, condition ok |
| Engine & Performance | Coolant | Hose present |
| Engine & Performance | Leaks & seals | No visible leaks |
| Engine & Performance | Engine cover | Removed for photo |
| Engine & Performance | Main Frame & Track Frame | Clean, gravel surface |
| Exterior Condition & Visual Inspection | Engine Hood | Off, stored |
| Exterior Condition & Visual Inspection | Side Access Doors | Yellow, good paint |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present, good |
| Exterior Condition & Visual Inspection | Boom Condition | Good, no dents |
| Exterior Condition & Visual Inspection | Arm Condition | Good |
| Exterior Condition & Visual Inspection | Lights | Present on top |
| Exterior Condition & Visual Inspection | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Good |
| Hydraulic System | Hydraulic Pump & Valve Block | Under cover |
| Hydraulic System | Bucket Hydraulic Jack | Good, black hoses |
| Hydraulic System | Arm Hydraulic Jack | Good |
| Hydraulic System | Hydraulic hoses | Grey color, good |
| Hydraulic System | Swivel Joint | Present |
| Transmission & drive train | Travel motors | Present both sides |
| Transmission & drive train | Bucket Pins Condition | Pin type visible |
| Attachments | Attachments model | Standard dig bucket |
| Attachments | Status | Good, teeth present |
| Attachments | Coupler status | Pin-on type |
| Tracks Condition | Left Track | Good, clean |
| Tracks Condition | Right Track | Good, clean |
| Tracks Condition | Track Pads | Good width |
| Tracks Condition | Sprockets | Good |
| Tracks Condition | Idlers | Good |
| Tracks Condition | Rollers | Present, good |
| Tracks Condition | Damages / Cuts | None visible |
Estimated Price
$28,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Yusuf Bin Ahmed Kanoo (Kanoo Machinery)
Supplier Description:Kanoo Machinery is the industrial division of the renowned Kanoo Group in the Gulf region.
Supplier address:*********** Jeddah, 21411, Saudi Arabia
Yusuf Bin Ahmed Kanoo (Kanoo Machinery)
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Brian Wu
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.