2021 CAT 330GC Crawler Hydraulic Excavator
Condition:Used
Hours:3571
Country:Yemen
Overview
| Brand | Caterpillar |
|---|---|
| Model | CAT 330GC |
| Country | Yemen |
| Year | 2021 |
| Hours | 3571 |
| Operating Weight | 30 Tons |
| Bucket Capacity | 1.6m³ |
| Condition | Used |
| Supplier Name | Elaghil Trading Company Ltd |
Product Description
Today I went to check out a 330GC, located at a yard about an hour’s drive from the city. The weather was overcast and the ground was a bit muddy, so I couldn’t get the undercarriage as clean as I would have liked, but I was still able to get a clear enough look at its overall condition. On the first thing you’re going to see is the hour meter – 3571.6h – which is actually quite low for a 2020, honest if I had a D2 now, I’d be wanting to see more on the meter. Upon start up, and turned it on cold, which isn’t supposed to smoke, cat engine is solid, it is the Perkins C7.1 and it lit right up. It warmed up and ran the boom and stick a couple times, no hesitation, hydraulics responded promptly, there was no lagging in the bucket curl, no hesitation in the arm pivot and couldn’t get the arm fully extended as they had it parked between two other machines.
Dried mud caked on the rollers, so I used my boot to wipe the dust away and see if there was any oil weeping—um, let me look through my notes again! They didn’t, there was no weep of grease or oil anymore, and didn’t appear to be on the idlers either. Sprockets looked fine. Inspected swing bearing area, checked the pump compartment; there were no wet spots, there was no pooling, no cracks or bulges in the hoses in the engine bay and the clamps were tight. There’s rust on the manifold but as expected anything worked in the outside will have surface rust. Engine bay was very clean, given the number of hours, would make me think it has been either recently detailed or the engine hasn’t been pushed hard. Cabin’s clean. Screen works. I’m not displeased with the seat pocket, the operator’s manual just isn’t there but it can be downloaded. Paint is in good order; no large gouges and counterweight is clean, as are the boom cylinders and stick cylinder. Machine digs well. No play. If it had actually to be wagered, I’d feel that it has actually undergone yard upkeep, was in low to medium usage, possibly a rental fleet or perhaps public work, and was not a demo or quarry beating machine. There will not be a 2020 with less than 4k hours that doesn’t have some problem and this one seems to be fine as far as I can see in 45 minutes.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | CAT |
| Model | 330GC |
| Undercarriage | Used |
| Track Chains | Worn |
| Track Rollers | Dirty |
| Idlers | Ok |
| Sprockets | Used |
| Bottom Plates | Rust |
| Boom | Good |
| Stick | Good |
| Bucket | Worn |
| Hoses | Old |
| Hose Clamps | Present |
| Hydraulic Motor | Good |
| Swing Motor | Ok |
| Travel Motors | Dirty |
| Main Pump | Ok |
| Control Valve | Present |
| Pilot Valve | Ok |
| Hydraulic Tank | Good |
| Hydraulic Filter | Dirty |
| Fuel Tank | Ok |
| Air Filter | Dirty |
| Radiator | Ok |
| Fan | Good |
| Engine CAT C7.1 | Present |
| Turbo | Rust |
| Exhaust | Rust |
| Engine Oil | Ok |
| Coolant Hoses | Old |
| Wiring Harness | Used |
| Battery | Ok |
| Alternator | Present |
| Starter | Ok |
| Cab | Used |
| Seat | Worn |
| Monitor Display | Good |
| Joysticks | Ok |
| Pedals | Worn |
| Glass | Dirty |
| Wipers | Old |
| Door | Ok |
| Roof Vent | Dirty |
| Hour Meter | 3571h |
| Paint | Faded |
| Grease Points | Dirty |
| Pins | Worn |
| Bushings | Used |
| Counterweight | Ok |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | No |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Horn | Yes |
| Operator Cabin Details | Seat and Arm Support | Worn fabric |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Washer, Wipers | Ok |
| Operator Cabin Details | Cab Floor Covering | Muddy |
| Operator Cabin Details | Cab Structure, Gard | Ok, no guard |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Rusty |
| Engine & Performance | Belts & Air/Oil Filters | Dirty filter |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks& seals | Minor leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Both sides ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used, ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Ok |
| Exterior Condition & Visual Inspection | Battery Check | Ok |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded yellow |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Bucket Swing cylinder | Ok |
| Undercarriage System | Track Chains Left | Worn |
| Undercarriage System | Track Chains Right | Worn |
| Undercarriage System | Track Rollers | All present |
| Undercarriage System | Idlers | Ok greased |
| Undercarriage System | Sprockets | Teeth wear |
| Undercarriage System | Track Frame | Muddy |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
Estimated Price
$43,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Elaghil Trading Company Ltd
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Eric Lin
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.