2020 SANY SY335H Crawler Hydraulic Excavator
Condition:Used
Hours:1000
Country:Saudi Arabia
Overview
| Brand | Sany |
|---|---|
| Model | SY335H |
| Country | Saudi Arabia |
| Year | 2020 |
| Hours | 1000 |
| Operating Weight | 33 Tons |
| Bucket Capacity | 1.85 m³ |
| Condition | Used |
| Supplier Name | Abdul Latif Jameel Machinery |
Product Description
This machine is a SANY SY335H, which I walked today at the yard, between a couple of Volvos and a Cat—already open engine compartment, in I went. Nearly all of the block still has the paint, turbo housing is still there, no cracks visible on the manifold, and here’s the thing, I spent a good 10 minutes looking to see where must have wept oil around the pump, swing motor housing around all the normal places that things weep after a few thousand hours could find no fresh places. The hoses that feature that spiral wrapping-up are all gray or black, some seem to have been replaced or at least re-routed recently as the wrapping is relatively clean, there is no cracking or dry rot visible, and the BAOCH sticker on the fuel filter appears fairly new, PL 420 model if that’s relevant to someone reading this.
The inside of the cab still got their original plastics on both seats which is unusual for a used cab, maybe brand new stock or maybe the guy wrapped them up to transport them or sell them – floor mats are clean, they have those red cloths on the controls like decorations or good luck charms I guess, operator’s manual is missing in the cab door pocket, but it’s not a mechanical issue – let’s see the blade again… ok about the dozer blade, it’s black paint, some surface rust on the edges, but nothing structural, bolts seem tight. Bucket is a standard rock setup 5 teeth maybe 1.3 metres wide cutting edge has wear but teeth haven’t snapped or ground down to nubs yet, probably would be good for another few months of regular digging before you’d want to flip or replace them. Engine started well, no excessive smoke from stack, didn’t get to run it under load as there were three other machines blocked in front of it, but engine idle was good, no funny noises from pump or hydraulics sitting there. In my opinion this car is as good as the average car and has been either used very lightly or cared for well by the owner, when buying a Chinese mid-sized there are no red flags that would deter me if it were a good deal. Mechanically it’s okay but tracks could use a cleaning.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY335H |
| Engine Cover | Ok |
| Valve Block | Present |
| Oil Filter | Present |
| Hydraulic Pump | Good |
| Hoses | Ok |
| Wiring | Present |
| Radiator | Clean |
| Turbo | Present |
| Exhaust Pipe | Used |
| Engine Serial Number | Visible |
| Bucket | Present |
| Bucket Teeth | Worn |
| Bucket Size | Large |
| Boom Cylinder | Ok |
| Arm Cylinder | Ok |
| Hydraulic Lines | Present |
| Track Shoes | Good |
| Track Frame | Ok |
| Undercarriage | Used |
| Cab Glass | Clean |
| Operator Seat | Wrapped |
| Control Levers | Red Flags |
| Joysticks | Wrapped |
| Monitor Display | Present |
| Safety Stickers | Yes |
| Cab Interior | New |
| Floor Mat | Clean |
| Warning Label | Yes |
| Counterweight | Present |
| Year | New |
| Paint | Good |
| Decals | Present |
| Cab Structure | Ok |
| Door Seals | Good |
| Rear View | Clean |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Boom Hydraulic Check Valve | Ok |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Ok |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Horn | Yes |
| Operator Cabin Details | Seat and Arm Support | Wrapped, new |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Red flags, wrapped |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Operator Cabin Details | Dashboard Screen, Gauges | Present |
| Operator Cabin Details | Warning alarms message | Visible |
| Operator Cabin Details | Cab Floor Covering | Clean |
| Operator Cabin Details | Cab Structure, Gard | Ok, mesh guard |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Used |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks& seals | Minor |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Ok |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Present on seat |
| Exterior Condition & Visual Inspection | Engine Hood | Yellow, ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used, good |
| Exterior Condition & Visual Inspection | Arm Condition | Used, ok |
| Exterior Condition & Visual Inspection | Lights | Ok |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Present |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Ok |
| Limited Functional Testing & Operation | Arm Pins Condition | Ok |
| Limited Functional Testing & Operation | Bucket Pins Condition | Ok |
| Attachments | Attachments model | Digging bucket |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Tracks | Track Type | Steel crawler |
| Tracks | Track Width | Standard |
| Tracks | Track Condition | Used, ok |
Estimated Price
$36,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Abdul Latif Jameel Machinery
Supplier Description:Abdul Latif Jameel Machinery, a division of the renowned Saudi Arabian ALJ Group, boasts over 70 years of history.
Supplier address:*********** Jeddah, 21411, Saudi Arabia
Abdul Latif Jameel Machinery
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Michael Wang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.