2014 SANY SY305H Crawler Excavator
Condition:Used
Hours:2500
Country:Thailand
Overview
| Brand | Sany |
|---|---|
| Model | SY305H |
| Country | Thailand |
| Year | 2014 |
| Hours | 2500 |
| Operating Weight | 31.5 Tons |
| Bucket Capacity | 1.7 m³ |
| Condition | Used |
| Supplier Name | คุณประเสริฐ |
Product Description
SY305H from SANY with the Volvo counterweight setup which is an appropriate setup for what it is today. The Cab still has all the factory plastic still on the seats as well as all the controls, red ribbons tied around all over it as if it just came off the boat, or it must be somebody still not sold, so it’s being showroom-shined. Engine bay, I was impressed, and this is one of the few Chinese pinnipedes I’ve seen in rolling stock that didn’t have a bit of surface rust on the exhousing (Chinese, it’s normal as we all know, and there was none that I could see on the bottom of the oil pan or anywhere linear) and nearly spotless valve covers with only dust. Flushed out hydraulics, toured around all of the weeps are tighter and no places anywhere are showing pitting, I can’t see any, the stick and boom cylinders have clean chrome, no pitting I can see, the pump area is dry, the swing motor housing is dry and the seals aren’t sweating on anything at all.
The sprockets don’t look worn but do not appear spectacular either – if you’re doing serious amounts of hours you may be looking at a very near resprocketing. They are of the rubber pad type and if they are road work, good – but you’ll not find rock quarry guys going for these. The edge on the bucket is worn, pins seemed as though they fit with my eye, but didn’t have the bar to measure playout. An operator’s manual that I think I should have been more disturbed with, but wasn’t, is also missing from the seat pocket. No abuse but rather it was used which leaves some scratches to Paint on the counterweight and a few spots of wear to the surface of the boom. Unfortunately this meter wasn’t in the photos I took but by the wear on the meter I would say it gets low to moderate use but again not a ton of use. Well for that price, pretty much in better shape than most for a Chinese excavator, no oil leaks that I noticed (rare for any excavator), Engine compartment didn’t smell cooked which is a good sign that someone didn’t baby it, and it was wrapped up inside shows that someone left it in pretty good shape or did a good prep for export. Some folks don’t like the sound of Turbo rust but some bigger of its kind ran for years. Tracks are ultimately going to require some maintenance. No smoking. Hydraulics respond clean. Otherwise if it’s in shape and priced accordingly and quality isn’t a requirement you won’t find anything better than this, I have seen ‘beat to hell’ Kobelcos fetch a higher price.
Product Condition Checklist
| Column 1 | Column 2 |
|---|---|
| Brand | SANY |
| Model | SY305H |
| Paint | Good |
| Cab Glass | Clean |
| Cab Door | Present |
| Seat Cover | Plastic |
| Red Ribbons | Yes |
| Engine Cover | Clean |
| Turbo | Present |
| Radiator | Clean |
| Oil Filter | White |
| Exhaust Pipe | Rust |
| Boom Cylinders | Good |
| Arm Cylinder | Good |
| Bucket Cylinder | Good |
| Hydraulic Hoses | Good |
| Hose Clamps | Present |
| Boom | Good |
| Arm | Good |
| Bucket | Worn |
| Tracks | Good |
| Track Pads | Good |
| Undercarriage | Clean |
| Counterweight | Present |
| Rear Cover | Present |
| Side Cover | Present |
| Engine Hood | Yellow |
| Control Valve | Present |
| Hydraulic Tank | Present |
| Fuel Filter | Present |
| Breather | Present |
| Wiring | Good |
| Solar Panel | Present |
| Backup Camera | Present |
| Rear Lights | Present |
| Work Light | Present |
| Slew Motor | Present |
| Travel Motor | Present |
| Joysticks | Present |
| Monitor | Present |
| Overall | Used |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | Yes |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors | Ok |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Operator Cabin Details | Dashboard Screen, Gauges | Covered |
| Operator Cabin Details | Air Conditioning | Present |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System | Rusty |
| Engine & Performance | Oil Filters | Ok |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame | Ok |
| Exterior Condition & Visual Inspection | Protective Covers | Seat covered |
| Exterior Condition & Visual Inspection | Engine Hood | Clean, yellow |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Good |
| Exterior Condition & Visual Inspection | Arm Condition | Good |
| Exterior Condition & Visual Inspection | Lights | Present |
| Hydraulic System | Hydraulic Leaks | No visible leaks |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump | Present |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Ok |
| Limited Functional Testing & Operation | Arm Pins Condition | Ok |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used, worn edges |
| Attachments | Coupler status | Pin-on |
| Tracks & Undercarriage | Front Right | Good |
| Tracks & Undercarriage | Front Left | Good |
| Tracks & Undercarriage | Rear Right | Good |
| Tracks & Undercarriage | Rear Left | Good |
| Tracks & Undercarriage | Type | Steel tracks |
Estimated Price
$41,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
คุณประเสริฐ
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.