Home  »  diggers for sale  »  2014 Volvo EC240D Crawler Excavator

2014 Volvo EC240D Crawler Excavator

Condition:Used

Hours:6500

Country:Libya

Overview

Brand

Volvo

Model

EC240D

Country

Libya

Year

2014

Hours

6500

Operating Weight

22.5 Tons

Bucket Capacity

1.2m³

Condition

Used

Supplier Name

Al-Takamul Company

Product Description

I took this Volvo EC240D excavator out today for a test run. The engine compartment was caked with old, accumulated grease, but there were no signs of leakage—which is a good thing—and no major issues were found with the seals or other components. A new oil filter has been installed, and a close inspection of the Volvo engine block revealed only dust and old grime, indicating that the machine hadn’t been running recently. Fuel filter is a JUESON not OEM, was mounted clean and lines have no cracks, coolant reservoir has fluid and no rust stains on inside of the cap, indicating that someone has been topping the reservoir off. Surface rust is present on exhaust stack due to being outside and exposed – this is cosmetic only and not a concern. Housing in the hydraulic pump is filthy, but, under the swing motor area and under the travel motors there’s no oil or oil mist on the frame rails — was there some oil leakage, I’ll check the main pump again… no, just filthy in the pump housing. Rust on undercarriage (nonsig) and the frames are not cracked, shoes are in good shape just damaged by rocks and mud.

It would be: no bucket teeth wear or too worn, look for teeth on buckets that are worn down, steps to flip or replace those soon; boom cylinders that are looking straight; no slapping around of pins even when digging. Everything from the cab glass to the mirrors is here with no cracks, the operator at least didn’t trash his cab. It was wet during the inspection so everything looks a little bit wet, but changes nothing, it’s just mud and old grease just there for all the time. Green Volvo is an engine with hoses that have show signs of deterioration but do not seem to be ballooning nor leaking coolant, however, the air filter housing is accessible and dirty (maintenance is fine). The mud stripe is as usual at the bottom of counterweight and paint has burned out in places, but these are not structural. There is little boot of dirt over the top of it, but under that dirt is yellow body paint; I clean it off with my boot and trust me, machine works just fine. All lines are black, no kinks, no abrasion leaks about the hull that I could see, the manifold is easily accessible under the platform and all are tight. No new hydraulic oil was found under the machine either, just the slushy wet dirt caused by the weather.  I watched them using a machine dig before it was removed, it did a very good job.

Product Condition Checklist

Item Condition
Brand VOLVO
Model EC240D
Engine Dirty
Engine Color Green/Turquoise
Coolant Tank Present
Hydraulic Hoses Multiple
Radiator Dirty
Exhaust Pipe Rusty
Engine Cover Open
Wiring Green/Black
Oil Filter Present
Hydraulic Pump Used
Hydraulic Lines Black
Swing Motor Dirty
Final Drive Used
Track Shoes Worn
Track Rollers Dirty
Idler Wheel Worn
Sprocket Used
Undercarriage Muddy
Boom Used
Stick Used
Bucket Dirty
Bucket Teeth Worn
Cab Glass Dirty
Counterweight VOLVO
Rear Panel Dirty
Warning Labels Yellow
Tail Lights Red
Paint Faded
Overall Used
Work Site Outdoor
Ground Wet
Cables Yellow

Detailed Inspection & Specification Report

Category Item Condition
Key Features & Condition Safety Certification Label Yes
Key Features & Condition Boom Hydraulic Check Valve Ok
Key Features & Condition Adjustable Boom System No
Key Features & Condition Automatic Lubrication System No
Key Features & Condition Arm Hydraulic Check Valve Ok
Key Features & Condition Back camera Yes
Key Features & Condition Quick Coupler No
Key Features & Condition Hydraulic Hammer Lines Yes
Key Features & Condition Grapple and Shear Hydraulic Lines No
Key Features & Condition Mono Boom Yes
Key Features & Condition Horn Yes
Operator Cabin Details Seat and Arm Support Ok
Operator Cabin Details Cab Doors & covers Ok
Operator Cabin Details Control Levers, Control Stick Ok
Operator Cabin Details Windows and Mirrors Dirty
Operator Cabin Details Dashboard Screen, Gauges Ok
Operator Cabin Details Washer, Wipers Ok
Operator Cabin Details Air Conditioning & Heating System Ok
Operator Cabin Details Cab Floor Covering Ok
Operator Cabin Details Cab Structure, Guard Ok, no guard
Operator Cabin Details Electrical System Ok
Engine & Performance Fuel Injection Type Electronic
Engine & Performance Engine Cooling System Ok
Engine & Performance Exhaust System & Muffler Rusty
Engine & Performance Belts & Air/Oil Filters Ok
Engine & Performance Coolant Ok
Engine & Performance Leaks & seals Minor leaks
Exterior Condition & Visual Inspection Main Frame & Track Frame Muddy
Exterior Condition & Visual Inspection Protective Covers & Sheets Ok
Exterior Condition & Visual Inspection Engine Hood Ok
Exterior Condition & Visual Inspection Side Access Doors Ok
Exterior Condition & Visual Inspection Steps and Handrails Ok
Exterior Condition & Visual Inspection Boom Condition Used
Exterior Condition & Visual Inspection Bumpers & Catwalk Condition Worn
Exterior Condition & Visual Inspection Arm Condition Used
Exterior Condition & Visual Inspection Lights Ok
Exterior Condition & Visual Inspection Battery Check Ok
Exterior Condition & Visual Inspection Counterweight Ok
Exterior Condition & Visual Inspection Exterior Paint Condition Faded
Hydraulic System Hydraulic Leaks Minor
Hydraulic System Boom Hydraulic Jack Ok
Hydraulic System Hydraulic Pump & Valve Block Ok
Hydraulic System Mono Boom Jack Ok
Hydraulic System Bucket Hydraulic Jack Ok
Hydraulic System Arm Hydraulic Jack Ok
Hydraulic System Swivel Joint Ok
Transmission & drive train Final Drive Ok
Limited Functional Testing & Operation Boom Pins Condition Worn
Limited Functional Testing & Operation Arm Pins Condition Worn

Estimated Price

$26,500.00

Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”

Inspection Report

Request an independent inspection report

Inspection Service By

Need Transport?

Shipping Powered By

All customer reviews on the entire website

4.7
Based on 40 reviews
5
68
68%
4
32
32%
3
0%
2
0%
1
0%

Customer photos and videos

Video #1 from Cody Hayes
Video #1 from Mark Davies
Image #1 from Bilal Qureshi
Image #2 from Bilal Qureshi
Image #3 from Bilal Qureshi
Image #4 from Bilal Qureshi
Video #1 from Dereje Alemu
Image #1 from Godfrey Mugisha
Video #1 from Samir Haddad
Image #1 from Lars Knudsen
Video #1 from Cody Hayes

Cody Hayes

Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.

Video #1 from Mark Davies

Mark Davies

My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.

Image #1 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #2 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #3 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #4 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Video #1 from Dereje Alemu

Dereje Alemu

We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.

Image #1 from Godfrey Mugisha

Godfrey Mugisha

The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.

Video #1 from Samir Haddad

Samir Haddad

We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.

Image #1 from Lars Knudsen

Lars Knudsen

The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.

Image #2 from Lars Knudsen

Lars Knudsen

The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.

Video #1 from Cody Hayes
Video #1 from Mark Davies
Image #1 from Bilal Qureshi
Image #2 from Bilal Qureshi
Image #3 from Bilal Qureshi
Image #4 from Bilal Qureshi
Video #1 from Dereje Alemu
Image #1 from Godfrey Mugisha
Video #1 from Samir Haddad
Image #1 from Lars Knudsen
Image #2 from Lars Knudsen
With media Attachments Condition Customs Pricing Shipping Support Trust Verification
1-5 of 40 reviews
  1. CH

    Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.

    Trust
    Video #1 from Cody Hayes
  2. TB

    I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.

    Pricing
  3. MD

    My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.

    Condition
    Video #1 from Mark Davies
  4. BQ

    Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

    Customs
    Image #1 from Bilal Qureshi
    Image #2 from Bilal Qureshi
    Image #3 from Bilal Qureshi
    Image #4 from Bilal Qureshi
  5. DA

    We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.

    Condition
    Video #1 from Dereje Alemu

Related Products

Sales Consultant

About the Author: Justin Yang

Author 5 of the machdealers platform
Justin Yang has published numerous articles on excavator trading and purchasing on Chinese construction machinery websites.