2023 XCMG XE60WGA Wheeled Excavator
Condition:Used
Hours:300
Country:Yemen
Overview
| Brand | XCMG |
|---|---|
| Model | XE60WGA |
| Country | Yemen |
| Year | 2023 |
| Hours | 300 |
| Operating Weight | 6.0 Tons |
| Bucket Capacity | 0.23 m³ |
| Condition | Used |
| Supplier Name | Tehama Trading Co. |
Product Description
I conducted an on-site inspection of this XCMG XE60WGA wheeled excavator at a location in the city. The sky was overcast, but the rain was light and caused no real hindrance. Overall, the Machine looks like she’s never been used on demo jobs or worked on tight urban projects as there are no scuffs, large dents, or other marks that would indicate being loaded onto a truck and transported and abused. 1 XCMG 6 ton class wheel machine with 4 rubber tires, decent tread is not rounded off with black rims and standard digging bucket, teeth are not rounded off. Rear dozer blade fitted and all of the hydraulic lines on the boom and stick are in factory state and no “hacks” or zip ties to keep it all together as that is a good indicator on all of the Chinese iron. Surprised me a little on the engine compartment, did expect to see oil seeping from all weeping gaskets and oil mist on the top of the engine, but no, all clean, hoses don’t appear to be cracked or swollen, air filter housing sealed up properly, the radiator cap area looks clean, no stains. Uh, let me look in the hydraulic reservoir again… yeah, just light surface dust (no wetness). Seals on cylinders are also dry and this is important as after one year, these smaller machines will start to weep if left inactive.
That’s where I was spending most of my time as that’s where wheeled machines show where they have problems – got down on the ground with a flashlight and the axles, drive components, and hydraulics look fine (no leaks or overly worn/torn boots on axles/bearings, or worn/torn-out tread pattern on tires – all vehicles start to leak or develop issues down there and, most noticeably, the tires! Unfortunately, couldn’t tell for sure on this one as I would need it up on a lift in order to measure it properly but based on what I saw it’s not chewed up. There are rear taillights, no corrosion on the electrical connectors, wiring appears to be in good shape. Controllability is smooth, stick doesn’t have too much slop to it when cycling through the range of full stick and no excessive play in boom pivot points is noticed. Pins are tight. Bucket curls fast. That’s about it – it digs, drives without any sort of leakage or noises or anything; paint is not concealing bodywork. Just a relatively clean used wheel excavator which was not beaten to death by some.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | XCMG |
| Model | XE60WGA |
| Yellow Paint | Good |
| Black Trim | Good |
| Cabin Glass | Clean |
| Operator Seat | Good |
| Control Joystick | Present |
| Boom | Good |
| Arm | Good |
| Bucket | Present |
| Bucket Teeth | Ok |
| Hydraulic Cylinders | Good |
| Hydraulic Hoses | Present |
| Wheel Tires | Good |
| Tire Tread | Ok |
| Front Wheels | Good |
| Rear Wheels | Good |
| Wheel Rims | Black |
| Rear Stabilizer | Present |
| Side Stabilizer | Present |
| Engine Cover | Closed |
| Warning Label | Present |
| Undercarriage | Clean |
| Axle | Good |
| Drive Shaft | Present |
| Hydraulic Pump | Ok |
| Transmission | Good |
| Fuel Lines | Present |
| Electrical Wiring | Present |
| Air Filter | Present |
| Cooling Fan | Present |
| Radiator | Good |
| Engine Block | Clean |
| Oil Filter | Present |
| Fuel Tank Cap | Orange |
| Control Cables | Present |
| Safety Guards | Present |
| Step Plates | Good |
| Handrails | Present |
| Lights | Present |
| Mirrors | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Stabilizer Blade Condition | Ok |
| Operator Cabin Details | Seat and Arm Support | Good |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Present |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Present |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Clean |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Closed |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present |
| Exterior Condition & Visual Inspection | Boom Condition | Good |
| Exterior Condition & Visual Inspection | Arm Condition | Good |
| Exterior Condition & Visual Inspection | Lights | Present |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Fresh |
| Exterior Condition & Visual Inspection | Operating Weight | 22,600 |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Present |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Axles | Present |
| Transmission & drive train | Swivel Joint | Ok |
| Transmission & drive train | Universal Joint | Present |
| Transmission & drive train | Bucket Pins Condition | Ok |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Ok |
| Attachments | Coupler status | Pin-on |
| Tires Estimated Remaining Life % | Front Right | Ok |
| Tires Estimated Remaining Life % | Front Left | Ok |
| Tires Estimated Remaining Life % | Rear Right | Ok |
| Tires Estimated Remaining Life % | Rear Left | Ok |
| Tires Estimated Remaining Life % | Size | Standard wheeled |
| Tires Estimated Remaining Life % | Type | Solid rubber |
| Tires Estimated Remaining Life % | Damages / Cuts | None visible |
Estimated Price
$12,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Tehama Trading Co.
Supplier Description:Established in 1969 and part of the Thabet Group, the company has served as the authorized Caterpillar dealer in Yemen since 1970.
Supplier address:********* Algiers Street, Sana’a, Yemen
Tehama Trading Co.
All customer reviews on the entire website
Customer photos and videos






Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.

Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.

Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.

Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.

Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.







Sorry, no reviews match your current selections
Related Products












Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.