Home  »  diggers for sale  »  2021 CAT 330D2L Crawler Excavator

2021 CAT 330D2L Crawler Excavator

Condition:Used

Hours:300

Country:Belarus

Overview

Brand

Caterpillar

Model

330D2L

Country

Belarus

Year

2021

Hours

300

Operating Weight

30 Tons

Bucket Capacity

1.5m³

Condition

Used

Supplier Name

OJSC BELAZ-SERVICE

Product Description

This 330D2L excavator is in excellent overall condition. I inspected the machine at noon today, and it looks as if it had just been unloaded from the transport ship—the seat is still wrapped in plastic, the joysticks have red protective covers, and the floor mats are still encased in their original packaging film. That’s where the lies manifest themselves first and that’s where I spent the majority of my time, pop the covers, everything is dry, no weeping around any of the pump seals, no brown crust touched up by someone on the fuel filter housing, no cracks on the hoses, all clamps torqued properly, not stained on block because something leaked, no staining around the block. Checked it twice. Clean machine.

Undercarriage (did not have time to swing it over dirt or get under it, and it’s sitting on pavement, but everything I could see from just walking around the tracks is that there isn’t much gouging on the pads, no chewed up sprockets, the rollers spin freely, I’d say maybe 10 percent or so wear if any.) No slop when grasping the bucket and shaking it, pins are tight on boom and stick, cylinders chrome and not pitted, cylinder seals look like new. The surface rust on the bolts of the swing motor is a common occurrence and the breather cap is present, as well as the sediment bowl on the fuel line that had a small amount of water settled at the bottom, nothing of concern as just sitting there, not running. 100% Hydraulic lines in good condition without any chafing where they run past the frame and all protective wrap is still present around the bundled lines in the area near the cab with no kinking. Really can’t find much wrong with it. Basically it is all a showroom, not that it was annoying, controls are wrapped up, no grease smeared all over the console like you get on most, windows are not scratched, no mud on the floor. Differs from these is no gouage in the paint, counterweight has no gouges, boom hasn’t been dragged anywhere, maybe bucket teeth have been slightly worn down a millimeter, this is either a demo or somebody bought it and never used.  If you are indeed seeking a tight 330, this is it, but do not delude yourself into thinking there is a lot of room to manoeuvre because whoever is selling will know it.

Product Condition Checklist

Item Condition
Brand CAT
Model 330D2L
Serial Visible
Engine 6-cyl
Paint Good
Cab Clean
Glass Protected
Seat New
Joysticks Wrapped
Floor Mat Protected
Boom Good
Arm Good
Bucket Present
Hydraulic Hoses Good
Main Pump Yellow
Swing Motor Yellow
Travel Motors Yellow
Radiator Clean
Oil Filter Yellow
Fuel Filter Present
Tracks Good
Track Pads Good
Undercarriage Clean
Sprockets Good
Idlers Good
Rollers Good
Frame Good
Counterweight Present
Decals Present
Safety Labels Present
Warning Labels Yes
Handrails Good
Steps Good
Engine Cover Closed
Side Panels Good
Hydraulic Tank Full
Coolant Ok
Engine Oil Ok
Battery Ok
Wiring Protected
Air Filter Present
Exhaust Good
Breather Present
Grease Points Ok
Pins Good
Bushings Ok
Cylinders Clean
Cylinder Rods Chrome Good
Hose Routing Organized

Detailed Inspection & Specification Report

Category Item Condition
Key Features & Condition Safety Label No
Key Features & Condition Auto Lube No
Key Features & Condition Quick Coupler No
Key Features & Condition Hammer Lines Present
Key Features & Condition Grapple Lines No
Key Features & Condition Mono Boom Yes
Key Features & Condition Horn Yes
Operator Cabin Seat New, wrapped
Operator Cabin Cab Doors Ok
Operator Cabin Levers, Joysticks Wrapped
Operator Cabin Windows, Mirrors Protected
Operator Cabin Dashboard, Gauges Covered
Operator Cabin Wipers Ok
Operator Cabin Floor Mat Protected
Operator Cabin Cab Structure Ok
Engine & Performance Fuel Injection Electronic
Engine & Performance Cooling System Ok
Engine & Performance Exhaust, Muffler Ok
Engine & Performance Belts, Filters Yellow, clean
Engine & Performance Coolant Ok
Engine & Performance Leaks & Seals None visible
Exterior & Visual Frame, Track Frame Clean
Exterior & Visual Engine Hood Ok
Exterior & Visual Side Doors Ok
Exterior & Visual Steps, Handrails Ok
Exterior & Visual Boom Good
Exterior & Visual Arm Good
Exterior & Visual Battery Ok
Exterior & Visual Counterweight Present
Exterior & Visual Paint Good
Hydraulic System Leaks None
Hydraulic System Boom Cylinder Ok
Hydraulic System Pump, Valve Yellow
Hydraulic System Bucket Cylinder Ok
Hydraulic System Arm Cylinder Ok
Hydraulic System Swing Cylinder Ok
Attachments Main Bucket Standard
Attachments Status Present
Attachments Coupler Pin-on
Tracks & Undercarriage Track Shoes Good
Tracks & Undercarriage Track Links Ok
Tracks & Undercarriage Sprockets Good
Tracks & Undercarriage Idlers Good
Tracks & Undercarriage Rollers Good
Tracks & Undercarriage Wear % Normal
Tracks & Undercarriage Damages None
Tracks & Undercarriage Grease Points Ok

Estimated Price

$41,600.00

Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”

Inspection Report

Request an independent inspection report

Inspection Service By

Need Transport?

Shipping Powered By

All customer reviews on the entire website

4.7
Based on 40 reviews
5
68
68%
4
32
32%
3
0%
2
0%
1
0%

Customer photos and videos

Video #1 from Cody Hayes
Video #1 from Mark Davies
Image #1 from Bilal Qureshi
Image #2 from Bilal Qureshi
Image #3 from Bilal Qureshi
Image #4 from Bilal Qureshi
Video #1 from Dereje Alemu
Image #1 from Godfrey Mugisha
Video #1 from Samir Haddad
Image #1 from Lars Knudsen
Video #1 from Cody Hayes

Cody Hayes

Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.

Video #1 from Mark Davies

Mark Davies

My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.

Image #1 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #2 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #3 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Image #4 from Bilal Qureshi

Bilal Qureshi

Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

Video #1 from Dereje Alemu

Dereje Alemu

We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.

Image #1 from Godfrey Mugisha

Godfrey Mugisha

The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.

Video #1 from Samir Haddad

Samir Haddad

We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.

Image #1 from Lars Knudsen

Lars Knudsen

The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.

Image #2 from Lars Knudsen

Lars Knudsen

The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.

Video #1 from Cody Hayes
Video #1 from Mark Davies
Image #1 from Bilal Qureshi
Image #2 from Bilal Qureshi
Image #3 from Bilal Qureshi
Image #4 from Bilal Qureshi
Video #1 from Dereje Alemu
Image #1 from Godfrey Mugisha
Video #1 from Samir Haddad
Image #1 from Lars Knudsen
Image #2 from Lars Knudsen
With media Attachments Condition Customs Pricing Shipping Support Trust Verification
1-5 of 40 reviews
  1. CH

    Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.

    Trust
    Video #1 from Cody Hayes
  2. TB

    I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.

    Pricing
  3. MD

    My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.

    Condition
    Video #1 from Mark Davies
  4. BQ

    Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.

    Customs
    Image #1 from Bilal Qureshi
    Image #2 from Bilal Qureshi
    Image #3 from Bilal Qureshi
    Image #4 from Bilal Qureshi
  5. DA

    We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.

    Condition
    Video #1 from Dereje Alemu

Related Products

Sales Consultant

About the Author: John, Muller

The-author-of-machdealers-1
Muller John is a senior excavator sales specialist who has been working in the excavator industry over thirty years.