2017 SANY SY225C Crawler Excavator
Condition:Used
Hours:7805
Country:Kazakhstan
Overview
| Brand | Sany |
|---|---|
| Model | SY225C |
| Country | Kazakhstan |
| Year | 2017 |
| Hours | 7805 |
| Operating Weight | 22.5 Tons |
| Bucket Capacity | 1.1 m³ |
| Condition | Used |
| Supplier Name | Eurasian Machinery LLP |
Product Description
This morning I examineed my sany SY225C – checked engine bay – all mitsubishi diesel, looked at valve cover – no fresh oil anywhere, no wet spots around head gasket area, the intake hose was intact, I squeezed and checked the red upper radiator hose for any cracks, the exhaust muffler was a solid vertical stack and I checked and blew through it, no holes. That is what a C-series monitor should read 7,805 hours, not low, not buried and it would get cold display when it was on S mode throttle at 1 when I took the photo, fuel was below the halfway mark, not sure if the tank’s got a slow drip or they didn’t fill it before I arrived.
I should be so naïve to put a wear-percent on this as they were steel all the way on both sides and the red clay mud was packed so heavily in that it is impossible for me to grab a wheel-measurement measurement today. Wait — I did land my boot heel on one of the links on the right side and the shoe is still pretty thick on it, though I wouldn’t say paper thin. But I’m being honest, I can’t measure that backing properly without a pressure wash and a tape measure. Surface of the rollers and idlers covered with crust. There was no visible cracking to the frame rails of the main frame. The swinging motor bay seems to be dry — no medication simply dripping down from the seal; the fit-ups that I could inspect were dry; the big bore hoses have some chalking on the rubber jacket; it is nothing more than UV aging, not structural problems. One yellow hard line, open port with copper cap looks like it was opened at some time but nothing alarming just looks like one of the auxiliary attachments lines were disconnected. Unit hydraulic filter down in lower bay is brand new/clean white and not brown and crusty as if it had been on for the last 4 years) and this is a true FLA unit.Cab is basic. The seat was air-foam wrapped and still had paper covering it – like they intended to sell it again I guess. When I took my pictures, I could not see all of the floor, so I can not say if the floor has been hose’d out, or if 2 seasons of mud is under the mats or not. There are no cracks or anything taped over any of the windows. This is an AIR PRE-CLEANER/Filruison Unit on top complete with bowl.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY225C |
| Engine | Mitsubishi |
| Hours | 7,805 |
| Fuel | Half |
| Coolant Temp | Ok |
| Warning Light | Yes |
| Paint | Faded |
| Body Rust | Minor |
| Tracks | Dirty |
| Track Wear | Used |
| Cab Glass | Dirty |
| Air Filter Brand | Filruison |
| Fuel Filter Brand | FLA |
| Hydraulic Pump | Used |
| Hydraulic Hoses | Used |
| Hose Fittings | Rusty |
| Oil Leak | No |
| Swing Motor | Present |
| Swing Motor Paint | Good |
| Control Valve | Present |
| Pipe Cap | Present |
| Bolt Flange | Ok |
| Engine Block | Dirty |
| Engine Rust | Minor |
| Exhaust | Dirty |
| Radiator Hose | Ok |
| Cooling Fan | Present |
| Engine Cover | Rusty |
| Side Panel | Ok |
| Ventilation Grille | Present |
| Anti-slip Plate | Present |
| Door Lock | Present |
| Safety Label | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back Camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Cab Doors & Covers | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Warning Alarm Message | Yes, 1 red light |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Engine & Performance | Fuel Injection Type | Diesel |
| Engine & Performance | Engine Model | Mitsubishi |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Rusty |
| Engine & Performance | Belts & Air/Oil Filters | FLA, Ok |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks & Seals | Minor |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint | Faded |
| Exterior Condition & Visual Inspection | Hours Meter | 7,805 |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Used |
| Hydraulic System | Swing Motor | Ok |
| Hydraulic System | Swing Valve Block | Ok |
| Hydraulic System | Hoses Condition | Old |
| Hydraulic System | Steel Lines | Ok |
| Hydraulic System | Capped Port | Yes |
| Hydraulic System | FLA Oil Filter | Present |
| Attachments | Attachment Model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler Status | Pin-on |
| Undercarriage | Track Type | Steel |
| Undercarriage | Track Pad Condition | Worn |
| Undercarriage | Track Frame | Muddy |
| Undercarriage | Undercarriage Overall | Dirty |
| Undercarriage | Damages / Cuts | Muddy |
Estimated Price
$14,200.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Eurasian Machinery LLP
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.