2018 SANY SY485H Large Crawler Excavator
Condition:Used
Hours:6100
Country:Yemen
Overview
| Brand | Sany |
|---|---|
| Model | SY485H |
| Country | Yemen |
| Year | 2018 |
| Hours | 6100 |
| Operating Weight | 49.5 Tons |
| Bucket Capacity | 2.2 m³ |
| Condition | Used |
| Supplier Name | Abu Al-Hussein for Trading |
Product Description
This is a Sany 485H excavator, When I opened the hood, the engine bay looked like it had the typical surface rust on the exhaust manifold (not glowing intensely), the dust was flat on the top, and nothing was dripping, nor was there smoke when powerful during inspection and the cooling system wasn’t leaking anywhere that I could see, and the valve cover is that light gray color, and the dust is not on top or surrounding it, the fan shroud was doing its duty. I would be looking for leaks in the hydraulics on any of these SANY’s and in particular, this one caught me off guard as swing motor is dry, track motors are dry and there was some dust on the main pump assembly but I checked twice just to make sure I wasn’t seeing a wet spot around the lines – no, just dust holly; no fresh ponds of oil anywhere. No leaks at cylinder rope end with boom and stick moving, seals don’t leak and pins are snug with no slop (when I got the Operator to run the boom and stick in place a couple of times). Bucket teeth are present and the cutting edge was not worn out.
The floor mats are obviously dirty because of the site I suppose, the seat isn’t torn up, the joysticks glide around freely with no sticking, the glass is all good with no cracks. A little rain while we were examining it, which made everything wet and muddy and makes it easier not to see small places that may be some leaks, but I didn’t see anything dripping out under the machine, and it was sitting for awhile. The problem here is under the carriage; those tracks have put in some hours and you’re likely going to need them refined in a couple years at most, depending on how you put your machine to use, rollers are muddy as hell, but they’re rolling fine and no oil was goose-necking out of any of the seals and idlers have edge wear, nothing serious at all. There is paint fade and mud built up on the counterweight and lower body panels, but it is redundant, there is some surface reddish build up where the paint has come off the frame rails, which is to be expected and no obvious cracks (that I can see) in the construction of the lower body pieces. It’s quite a good machine overall, I think their big machine line is the SY485H and it’s perfect for working, doesn’t smoke, has no strange noise or hydraulic problems that would cause me to turn around and walk away.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY485H |
| Engine Color | Gray |
| Cab Glass | Dirty |
| Seat | Used |
| Control Levers | Present |
| Safety Labels | Present |
| Cab Frame | Good |
| Exhaust Pipe | Rusty |
| Boom | Used |
| Stick | Used |
| Bucket | Worn |
| Bucket Teeth | Old |
| Hydraulic Cylinders | Ok |
| Hydraulic Hoses | Old |
| Track Shoes | Worn |
| Track Links | Dirty |
| Track Rollers | Rusty |
| Idlers | Worn |
| Sprockets | Used |
| Undercarriage | Dirty |
| Upper Frame | Ok |
| Counterweight | Present |
| Engine Hood | Good |
| Cooling Fan | Present |
| Air Filter | Dirty |
| Fuel Tank | Present |
| Hydraulic Tank | Present |
| Main Pump | Present |
| Control Valve | Present |
| Travel Motor | Present |
| Swing Motor | Present |
| Radiator | Dirty |
| Oil Cooler | Present |
| Handrails | Present |
| Steps | Old |
| Paint | Faded |
| Decals | Worn |
| Warning Stickers | Present |
| Engine Access | Good |
| Leaks | Minor |
| Overall | Used |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Old, used |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Cab Floor Covering | Used |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Leaks& seals | Minor leaks |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Good |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present |
| Exterior Condition & Visual Inspection | Boom Condition | Used, worn |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Present |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Status | Used, worn |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Track Links | Worn |
| Tracks Estimated Remaining Life % | Track Rollers | Used |
| Tracks Estimated Remaining Life % | Idlers | Worn |
| Tracks Estimated Remaining Life % | Sprockets | Used |
| Tracks Estimated Remaining Life % | Type | Steel |
Estimated Price
$56,500.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Abu Al-Hussein for Trading
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Michael Wang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.