2019 LOVOL FR80E Crawler Excavator
Condition:Used
Hours:3000
Country:Indonesia
Overview
| Brand | Lovol |
|---|---|
| Model | FR80E |
| Country | Indonesia |
| Year | 2019 |
| Hours | 3000 |
| Operating Weight | 8 Tons |
| Bucket Capacity | 0.32m³ |
| Condition | Used |
| Supplier Name | Bapak Eko Prasetyo |
Product Description
This is a Lovol FR80E small to medium-sized excavator, Today the sky was gray and drizzling on and off all day so everything looked wetter than they really were, really nothing crazy though – checked the yellow warning decal by the aircon console, chinese text, normal stuff, no big deal; the glass on the cab wasn’t cracked; comfortable dual joystick system under your hand; the lever with the red tip on the right side is smooth to operate; settled plaid seat cover – it is worn but not torn up; a dull logo/talkie cab door some honky slapped on for a reason, pad is fine though; the floor mat has dried mud tracked in from the boots – normal.
But SRM noted that the tracks are really dirty, likely a good thick layer of mud and sticky clay over time, and the shoe wear assessment isn’t possible because there was no exposed metal, but it should be hosed down and assessed again by a purchaser. boom and arm cylinders were cycled when a bucket-load picture was posted and there wasn’t any obvious play on the pins, and the bucket picked up some weight when it was lifted without jamming, and the hydraulics moved the bucket smoothly without any jerky movement. I would say the output of the cat engine here is fine for the size—no smoking during start up as seen, the sound of the cat steady one question here—the whole operators manual went missing, either due to missing paperwork or something else—cant say. Machine digs well. No play. All things considered, its operational and has no shroud on the ground needing dirt to be hosed off it before it gets to the dealership price, in my antennae anyway. buyer may want to have it steam cleaned and rechecked for track wear and pin bushings prior to being finalized on the dealership price, this is my unbiased opinion from the mud today.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | LOVOL |
| Model | FR80E |
| Color | Yellow |
| Paint | Good |
| Decal | Present |
| Side Sticker | Present |
| Boom | Yellow |
| Boom Paint | Good |
| Arm | Yellow |
| Arm Paint | Good |
| Bucket | Present |
| Bucket Teeth | Used |
| Cyl Rod | Good |
| Cyl Seal | Ok |
| Hyd Hose | Good |
| Hyd Pump | Grey cast |
| Pump Port | B marked |
| Pump Bolt | Ok |
| Pump Label | Present |
| Control Valve | Blue body |
| Valve Brand | MegaSys |
| Hose Rating | 5000 PSI |
| Valve Fitting | Ok |
| Valve Leak | No |
| Engine | 4-cyl diesel |
| Engine Cover | Open/visible |
| Engine Dirty | Yes |
| Fuel Pump | Present |
| Fuel Filter | Present |
| Oil Filter | Present |
| Injector Line | 4x present |
| Fan Belt | Present |
| Coolant Hose | Present |
| Engine Leak | No visible |
| Cab Glass | Ok |
| Glass Crack | No |
| Door | Present |
| Door Seal | Old |
| Seat | Plaid cover |
| Seat Tear | No |
| Joystick L | Present |
| Joystick R | Present |
| Hand Lever | Present |
| Throttle | Present |
| Pedal | Present |
| Floor Mat | Metal plate |
| Warning Label | Yellow present |
| Lock Label | Yellow present |
| Cab Interior | Used |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back Camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Stabilizer Blade Condition | Ok |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & Covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Cab Floor Covering | Dirty |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Engine & Performance | Fuel Injection Type | Mechanical |
| Engine & Performance | Engine Model | 4-cyl Diesel |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Leaks & Seals | Not visible |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers & Catwalk Condition | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good, minor scratch |
| Hydraulic System | Hydraulic Leaks | Not visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Bucket Swing Cylinder | Ok |
| Transmission & Drive Train | Swivel Joint | Ok |
| Attachments | Attachment Model | Digging Bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler Status | Pin-on |
| Tracks Estimated Remaining Life % | Left Track | ~60% |
| Tracks Estimated Remaining Life % | Right Track | ~60% |
| Tracks Estimated Remaining Life % | Track Width | ~400mm |
| Tracks Estimated Remaining Life % | Track Type | Rubber |
| Tracks Estimated Remaining Life % | Grouser Height | Low/Worn |
| Tracks Estimated Remaining Life % | Damages / Cuts | Muddy |
Estimated Price
$11,300.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Bapak Eko Prasetyo
Supplier address:*********** Kota Semarang, Jawa Tengah, 50117, Indonesia
Bapak Eko Prasetyo
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Sales Consultant
About the Author: Brian Wu
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.