2020 SANY SY155C Crawler Excavator
Condition:Used
Hours:6100
Country:Spain
Overview
| Brand | Sany |
|---|---|
| Model | SY155C |
| Country | Spain |
| Year | 2020 |
| Hours | 6100 |
| Operating Weight | 15.5 Tons |
| Bucket Capacity | 0.6 m³ |
| Condition | Used |
| Supplier Name | Maquinza S.A. |
Product Description
Today I pulled SY155C up a little further along a rock site and here is what I found under it after a bit of producing as it was completely covered with crushed stone to the frame skirts. With the machine running, (not under load, but most parts of the engine bay appear to be in good order) intercooler hoses are the red silicone replacements; both clamps are seated and there was no cracking on the visible part of the hoses and the charge air side looked dry. I didn’t see anything dripping while I was here, and there wasn’t any pooling on the floor of the compartment, but there is some old staining on the casing, and there was some brown-yellow and dried looking stuff around the base of the pilot pump and on a couple of the manifold ports, so not a leak per se, but I would watch it and see how it fails, or just pull the pilot pump seal now and be done with it.
But this is a story about undercarriage. I mean, taking an educated guess they would probably have another 40-50% life in the chassis once it gets the pressure washing and a few hours to scrub down to find out how much they’ve worn down, but visually the rollers do not look chewed up and the idler was not showing obvious flank damage, again from what angle I could get to measure it. The glass on the cab has a spider crack on the front lower left, but isn’t in itself, it’s been around for a while now looks how the operator is running. Counterweight was banged on lower right corner, paint off, some of the metal has been pushed in, not structurally significant, but it’s not attractive. Oh and his/her coffee thermos was still on the floor maturation, some time they did run it, leaves don’t blow in on the floor on a busy-running daily commute, but the holding hoses are all wrapped and the fittings didn’t seem to have weepage, though I didn’t slice them all open to find out. The exterior of cab is covered with dirt, glass other than crack is clear around the cab – no broken glass, no missing panels. It’s used rock machine, and it appears to be a rock machine. Price it that way.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY155C |
| Paint | Used |
| Body Lower | Dirty |
| Cab Exterior | Dirty |
| Cab Glass | Scratched |
| Cab Door | Ok |
| Mirror | Present |
| Warning Label | Present |
| Boom | Ok |
| Arm | Ok |
| Bucket | Present |
| Bucket Teeth | Worn |
| Hydraulic Pump | Present |
| Pump Color | Yellow |
| Hoses | Used |
| Hose Wrap | Used |
| Hose Fittings | Ok |
| Valve Block | Present |
| Oil Stain | Yes |
| Debris in Bay | Yes |
| Fuel Filter | Present |
| Oil Filter | Present |
| Filter Housing | Dirty |
| Turbo Hose | Used |
| Hose Clamps | Ok |
| Engine Bay | Dirty |
| Counterweight | Dented |
| Counterweight Paint | Chipped |
| Tracks | Dirty |
| Track Shoes | Used |
| Rollers | Dirty |
| Undercarriage | Heavy Dirt |
| Rock in Track | Yes |
| Worksite | Rocky |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back Camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Old |
| Operator Cabin Details | Cab Doors & Covers | Ok |
| Operator Cabin Details | Control Levers | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Cab Floor | Dirty |
| Operator Cabin Details | Cab Structure | Ok, no guard |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | SANY diesel 4-cyl |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust & Muffler | Ok |
| Engine & Performance | Belts & Filters | Ok |
| Engine & Performance | Leaks & Seals | No visible leak |
| Engine & Performance | Intercooler Hose | Red silicone, used |
| Engine & Performance | Hose Clamps | Ok |
| Exterior Condition | Main Frame & Track Frame | Muddy |
| Exterior Condition | Protective Covers | Ok |
| Exterior Condition | Engine Hood | Ok |
| Exterior Condition | Side Access Doors | Ok |
| Exterior Condition | Boom Condition | Used |
| Exterior Condition | Arm Condition | Used |
| Exterior Condition | Bumpers & Catwalk | Scratched |
| Exterior Condition | Counterweight | Ok |
| Exterior Condition | Rear Panel | Dented |
| Exterior Condition | Exterior Paint | Faded, used |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Jack | Ok |
| Hydraulic System | Arm Jack | Ok |
| Hydraulic System | Bucket Jack | Ok |
| Hydraulic System | Main Pump | Used, dual piston |
| Hydraulic System | Control Valve Block | Ok |
| Hydraulic System | Pilot Valve | Present |
| Hydraulic System | Hose Wrap Protection | Present |
| Hydraulic System | Fittings & Connectors | Ok |
| Hydraulic System | Swing Cylinder | Ok |
| Undercarriage & Drive | Track Shoes | Used |
| Undercarriage & Drive | Track Links | Used |
| Undercarriage & Drive | Sprocket | Used |
| Undercarriage & Drive | Road Wheels | Ok |
| Undercarriage & Drive | Carrier Rollers | Ok |
| Undercarriage & Drive | Idler | Ok |
| Undercarriage & Drive | Undercarriage Frame | Muddy |
Estimated Price
$15,100.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Maquinza S.A.
Maquinza S.A.
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Kevin Chen
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.