2020 SANY SY485H Pro Crawler Excavator
Condition:Used
Hours:3300
Country:China
Overview
| Brand | Sany |
|---|---|
| Model | SY485H Pro |
| Country | China |
| Year | 2020 |
| Hours | 3300 |
| Operating Weight | 50 Tons |
| Bucket Capacity | 2.6 m³ |
| Condition | Used |
| Supplier Name | Xuanhua Construction Machinery Development Co., Ltd. |
Product Description
Today around 3pm demo walked SY485H, this unit is smoke-free and idles well on a demo site engine cold, which should be the case with all SANY’s or this becomes a lemon. When I arrived, the Operator had it running digging; no cracks in the bucket shell, boom/stick pins move freely under load with no clunking or slop in the linkage indicating low hours or proper greasing. Hydraulics respond quick with no jerky movements and swing smooth both ways with tracks driving straight without pulling to one side.
The tracks are not sagging so bad for the weight of the mud placed on them. Inside Cabin, the floor and seat base is pretty filthy, the driver doesn’t seem to care much about the interior, blue curtain curtained in, but the door seams appear good. It was cloudy all of the time I was out there. Was thinking it was going to pour out of the sky but didn’t. Examine engine bay (heck do I need to elaborate on what I actually did, check, hahahaha) Valve cover has an oil film (not dripping…just normal from a leaky oil joint that still occurs on older engines, no real puddles anywhere), exhaust manifold has surface rust, normal, air intake hoses all seem fine, radiator area clean, dusty but no oil stains or fresh oil leaks. Prisoners in hydraulic pump, dry control valve housing and dirty (not wet) lines.Counterweight is dirty, top surface has a baked on dirt, which is typical when equipment is left outside, and top surfaces are faded due to over time use of equipment, wall is not worn brittle or uneven. Boom shows the normal loading truck scratches and paint chips without any cracks or welded repairs (that I could see). But I’d say overall it digs fine and runs fine, it’s just filthy and should get a bath before you’d know what you’ve got running under all of that mud.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY485H Pro |
| Cabin Glass | Dirty |
| Operator Seat | Used |
| Cabin Door | Present |
| Blue Curtain | Present |
| Floor Mat | Dirty |
| Control Levers | Present |
| Pedals | Present |
| Engine Cover | Present |
| Engine Brand | Visible |
| Valve Cover | Grey |
| Oil Filter | Present |
| Air Intake Hose | Pink/Red |
| Fuel System | Present |
| Hydraulic Lines | Present |
| Main Pump | Yellow |
| Control Valve | Grey |
| Swing Motor | Yellow |
| Hydraulic Tank | Present |
| Boom Cylinder | Good |
| Arm Cylinder | Good |
| Bucket Cylinder | Good |
| Boom Structure | Ok |
| Arm Structure | Ok |
| Bucket Teeth | Worn |
| Bucket Edge | Used |
| Track Frame | Muddy |
| Track Shoes | Dirty |
| Track Rollers | Ok |
| Idler Wheel | Ok |
| Drive Sprocket | Ok |
| Upper Structure | Ok |
| Counterweight | Present |
| Warning Labels | Present |
| Rear View Mirror | Present |
| Wiper | Present |
| Working Light | Present |
| Communication Tower | Background |
| Work Site | Demolition |
| Ground Condition | Muddy |
| Paint Finish | Used |
| Chinese Safety Label | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Boom Hydraulic Check Valve | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Present |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Present |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & covers | Dirty |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Air Conditioning & Heating System | Present |
| Operator Cabin Details | Cab Floor Covering | Muddy |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Operator Cabin Details | Air Conditioning & Heating System | Present |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Present |
| Engine & Performance | Belts & Air/Oil Filters | Dirty |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks & seals | Minor leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Present |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Present |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Present |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Rock bucket |
| Attachments | Size | Large |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
Estimated Price
$67,200.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Xuanhua Construction Machinery Development Co., Ltd.
Supplier Description:A pioneer in China’s bulldozer manufacturing, it belongs to the Fortune Global 500 company, HBIS Group.
Supplier address:************** Zhangjiakou City, Hebei Province
Xuanhua Construction Machinery Development Co., Ltd.
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.