2020 XCMG XE155DK Crawler Excavator
Condition:Used
Hours:6300
Country:Kyrgyzstan
Overview
| Brand | XCMG |
|---|---|
| Model | XE155DK |
| Country | Kyrgyzstan |
| Year | 2020 |
| Hours | 6300 |
| Operating Weight | 15.5 Tons |
| Bucket Capacity | 0.61 m³ |
| Condition | Used |
| Supplier Name | Айбек Мамбетов |
Product Description
This machine XCMG XE155DK excavator must have been idle for a while as it walked out in the mud today. The typical Chinese diesel engine bay (visible Weichai filters), the YZJ-052 oil filter is mounted (checked around the pump housing and hydraulic block) and We have not tried to clean up the engine bay today. I can see where the rubber is starting to wear through on the links. The sprockets seem to be in good shape, although it’s difficult to tell if there is any damage under it all because of the mud packed into the cracks between the idlers and the rollers on the sprockets.
All glass on Cab is perfect, all doors open and close easily, interior is filthy with mud on the pedals and all dried dirt, seat is not ripped, and the Joysticks move easily. Windshield is free from cracks. Boom and stick are well surfaced with rust, yellow paint is mostly gone from all high wear areas, counterweight is beat up but structurally sound, no cracks or weld I could see.Under the seat there was nothing in the way of an operator’s manual, just everything thrown in trash and old rags. If undercarriage frame is covered with mud, a load thicker than concrete, make sure that you have worked or stayed in the wet clay for at least months before you can clean it up and get a real feel for the condition of the rollers and the track frame welds. I didn’t see any line chafing but again, its really soiling up here.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | XCMG |
| Model | XE155DK |
| Boom | Yellow |
| Boom Paint | Faded |
| Year | Used |
| Paint | Faded |
| Cab Glass | Dirty |
| Seat | Old |
| Door | Present |
| ROPS | Yes |
| Boom | Rusty |
| Stick | Rusty |
| Bucket | Worn |
| Bucket Teeth | Missing |
| Pins | Worn |
| Hydraulic Hoses | Old |
| Hose Routing | Messy |
| Cylinder Rods | Rusty |
| Boom Cylinder | Pitted |
| Stick Cylinder | Pitted |
| Bucket Cylinder | Pitted |
| Track Links | Rusty |
| Track Rollers | Dirty |
| Idler Wheels | Dirty |
| Swing Motor | Dirty |
| Travel Motors | Dirty |
| Tracks | Heavy Wear |
| Track Links | Worn |
| Track Pins | Worn |
| Sprockets | Worn |
| Idlers | Worn |
| Rollers | Worn |
| Track Pads | Worn |
| Track Frame | Mud |
| Undercarriage | Heavy Mud |
| Engine Cover | Dirty |
| Engine | Dirty |
| Radiator | Dirty |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | No |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Old |
| Operator Cabin Details | Cab Doors & covers | Dirty |
| Operator Cabin Details | Control Levers, Control Stick | Present |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Air Conditioning & Heating System | Present |
| Operator Cabin Details | Cab Floor Covering | Muddy |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Operator Cabin Details | Electrical System | Old wiring |
| Engine & Performance | Engine Cooling System | Dirty |
| Engine & Performance | Exhaust System & Muffler | Present |
| Key Features & Condition | Safety Label | No |
| Key Features & Condition | Auto Lube | No |
| Key Features & Condition | Rear Camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hammer Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Blade | No |
| Key Features & Condition | Horn | Yes |
| Key Features & Condition | Safety Certification Label | No |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
Estimated Price
$13,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Айбек Мамбетов
Supplier Description:A private supplier specializing in used agricultural machinery and light construction equipment (such as skid steer loaders and graders).
Supplier address:********* Special Machinery Section, Bishkek, Kyrgyzstan
Айбек Мамбетов
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.