2023 SANY SY335H Crawler Excavator
Condition:Used
Hours:3000
Country:Bangladesh
Overview
| Brand | Sany |
|---|---|
| Model | SY335H |
| Country | Bangladesh |
| Year | 2023 |
| Hours | 3000 |
| Operating Weight | 33.5 Tons |
| Bucket Capacity | 1.85 m³ |
| Condition | Used |
| Supplier Name | আব্দুল জলিল |
Product Description
Ground was very wet and mud by the willow trees, walked this machine today and tracks were not caked up, sprockets looked as though they were not even worn in, same with the track pads, I think maybe 5-10% wear (rare for Chinese iron – but SANY‘s improved the past few years) and there was no play in the idlers, I pushed on them and they spin smooth, no chipping on the teeth. Pins are tight, no slop in the boom or stick when I cycled it a few times, hydraulics respond quick, no jerking or hesitation on the swing motor, seals on the cylinders look dry—wait let me check the pump housing again, yeah just old dust no fresh oil so that’s clean. Bucket’s a regular dig bucket, all teeth are present and the cutting edge is not completely worn out, and has a smooth quick coupler without sticking. Tint on cab, 2 mirrors, ROPS cage is solid but I was only able to look outside when it was unlocked and the operator was gone…can’t say if seat’s ripped or if AC works or if there’s dirt all over the floor – just couldn’t tell with the tint.
The paint looks quite nice, no gouges or rust on the counter weight, decals are still crisp, I’m not sure if this thing rolled right off the line or got a complete repaint recently, the engine covers fit right in place with no bent louvers or cracked plastic. Exhaust pipe is clean, no carbon crust, normally low hours or at least not abused…and no black smoke “crust” around the stack, thus no oil is being burned. Black sleeves on hydraulic hoses (no cracking or dry rot apparent, fittings clean and not weeping, boom cylinder rods shiny (good sign no pitting and no scoring) Nothing faded, it has the usual bunch of SANY logos and the Chinese warning labels for the ‘pinch points’. The inspection was done during wet weather and when we left there was no one to start up the engine so I didn’t hear anything, but for other reasons it looks fine: No leaks under the machine, no puddles formed, frame rails are in the correct position, no cracks in welds where the boom monts or the turntable are, etc. Tracks are not sagging, they are tensioned to the right. It’s honest for a 335, and way cleaner that most used iron I see, but with no hour meter reading or test dig I can say nothing about the number of hours on it or for or is there any hidey hoiday/gremlin in the hydraulics and so. Looks new though.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY335H |
| Paint | Good |
| Body Color | Yellow |
| Cab | Black |
| Tracks | Black |
| Boom | Extended |
| Bucket | Present |
| Bucket Teeth | Present |
| Hydraulic Hoses | Black |
| Arm Cylinders | Clean |
| Boom Cylinder | Clean |
| Exhaust Pipe | Grey |
| Cab Glass | Clean |
| Operator Seat | Present |
| Safety Rail | Present |
| Counterweight | Present |
| Track Pads | Rubber |
| Track Condition | New |
| Undercarriage | Clean |
| Engine Cover | Closed |
| Side Panels | Clean |
| Rear View | Clean |
| Logo Visibility | Clear |
| Model Marking | Clear |
| Warning Labels | Present |
| Safety Decals | Yellow/Red |
| Hydraulic Lines | Protected |
| Pin Connections | Good |
| Ground Condition | Wet |
| Background Equipment | Volvo Present |
| Site Condition | Construction |
| Weather | Overcast |
| Machine Position | Level |
| Boom Angle | Various |
| Stick Position | Various |
| Tracks Alignment | Parallel |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Present |
| Operator Cabin Details | Cab Doors | Ok, black |
| Operator Cabin Details | Control Levers, Control Stick | Present |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Engine & Performance | Oil Filters | Covered |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok, yellow |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok, vents visible |
| Exterior Condition & Visual Inspection | Boom Condition | Good, clean |
| Exterior Condition & Visual Inspection | Bumpers | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Good |
| Exterior Condition & Visual Inspection | Counterweight | Present, rear |
| Hydraulic System | Hydraulic Leaks | No visible |
| Hydraulic System | Boom Hydraulic Jack | Ok, black hoses |
| Hydraulic System | Hydraulic Pump | Covered |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok, double cylinder |
| Limited Functional Testing & Operation | Boom Pins Condition | Ok, greased |
| Limited Functional Testing & Operation | Arm Pins Condition | Ok |
| Limited Functional Testing & Operation | Bucket Pins Condition | Ok |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Medium, toothed |
| Attachments | Status | Good condition |
| Attachments | Coupler status | Pin-on |
| Tracks Condition | Track Type | Steel crawler |
| Tracks Condition | Track Pads | Rubber, black |
| Tracks Condition | Track Links | Good |
| Tracks Condition | Sprocket | Front mounted |
| Tracks Condition | Idler | Rear |
| Tracks Condition | Rollers | Multiple, black |
| Tracks Condition | Track Tension | Ok |
Estimated Price
$37,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:আব্দুল জলিল
Supplier address:************* Chattogram, 4212, Bangladesh
আব্দুল জলিল
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Eric Lin
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.