2026 XCMG XE35U Crawler Mini Excavator
Condition:Used
Hours:207
Country:Thailand
Overview
| Brand | XCMG |
|---|---|
| Model | XE35U |
| Country | Thailand |
| Year | 2026 |
| Hours | 207 |
| Operating Weight | 3.0 Tons |
| Bucket Capacity | 0.08 m³ |
| Condition | Used |
| Supplier Name | Sahakol Equipment PCL (SQ) |
Product Description
The operators stated it had not been used much, mainly on residential dig work and I suppose the hour meter supports that, although 207.8 hours is not much on a 2026, it still looks pretty green. This is XCMG XE35U model. Engine immediately fired up on no smoke and idled smoothly but when I cycled the boom and stick a few times the hydraulics was quick and did not lag or hunt as you want to see on this young machine. Inspected display screen – will turn on and all gauges come up however, is smudged and dusty like all operator touch-screens do after a month at site. There lies the Fire Extinguisher, no one ever remembers to check. The inside of the cab (floor) is dirty, and dirt and mud is tracked everywhere on the inside, seat fabric is worn, but nothing ripped, to be honest it’s just really dirty and a shopvac and a rag will clean it up.
Under the grime everything seems dry – let me check the pump area again – not seen anything weeping down there so far – cylinders don’t look sweating, rod chrome hasn’t lost too much of its gloss. Dull (Bucket cutting edge is filled with clay, but all Bucket must be like that), teeth are present, no cracks on bucketears, no cracks on stickpins, no cracks on the welds on bucketears. As for boom pivot area, minimal slop when I grasped it and shook as well as stick cylinder mounts. It appears that paint may have the customary nicks and scuffs from the jobsite, but there’s no rust blooming across any part which leads me to believe it hasn’t been exposed to the elements and kept in diaper service for months, likely garage kept or at least tarped most nights. One thing i’ve noticed, is the operator’s manual is gone from the seat pocket, not sure if that’s important to you but its also missing. It was also fairly humid today, so, everything felt damp but again it’s not the machine’s fault. Its an emissions compliant D1305-EF04 and it runs so clean that parts are available but at 207 hours I doubt there would be a need for anything other than filters and fluids for a minimum of a year at least. Nothing in the vehicle warning light or by looking at all of the codes that I went through in the menus.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | XCMG |
| Model | XE35U |
| Cab Glass | Dirty |
| Seat | Used |
| Control Panel | Ok |
| Display Screen | Present |
| Joystick | Good |
| Pedals | Worn |
| Body Paint | Faded |
| Safety Labels | Present |
| Cab Top Guard | Ok |
| Boom | Used |
| Arm | Used |
| Bucket | Worn |
| Bucket Teeth | Worn |
| Hydraulic Lines | Ok |
| Cylinders | Ok |
| Tracks | Worn |
| Track Pads | Used |
| Sprockets | Ok |
| Idlers | Ok |
| Engine Cover | Dirty |
| Alternator | Present |
| Starter Motor | Present |
| Coolant Tank | Present |
| Hoses | Old |
| Clamps | Rusty |
| Hour Meter | 207h |
| Fuel Level | Low |
| Warnings | Battery Red |
| Undercarriage | Dirty |
| Counterweight | Ok |
| Rear Lights | Present |
| Steps | Worn |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Stabilizer Blade Condition | Ok |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Warning alarms message | Battery low |
| Operator Cabin Details | Cab Floor Covering | Dirty |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Engine & Performance | Coolant | Present |
| Engine & Performance | Leaks& seals | Minor |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Dirty |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Dirty |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Worn |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Present |
| Exterior Condition & Visual Inspection | Battery Check | Low |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Worn |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Size | Standard |
| Tracks Estimated Remaining Life % | Type | Rubber pads |
Estimated Price
$11,600.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Sahakol Equipment PCL (SQ)
Supplier Description:Sahakol (SQ) is Thailand’s leading full-service mining solutions provider, listed on the Stock Exchange of Thailand.
Supplier address:************Chatuchak, Bangkok, 10900, Thailand
Sahakol Equipment PCL (SQ)
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.