2013 SANY SY305H Crawler Excavator
Condition:Used
Hours:5500
Country:Tajikistan
Overview
| Brand | Sany |
|---|---|
| Model | SY305H |
| Country | Tajikistan |
| Year | 2013 |
| Hours | 5500 |
| Operating Weight | 30.5 Tons |
| Bucket Capacity | 1.5m³ |
| Condition | Used |
| Supplier Name | LLC “Technotorg” (Technoshina) |
Product Description
This SANY SY305H was parked on a gravel surface, alongside several older Hyundai excavators. When my friend started the machine, my first impression was that the SANY was significantly quieter than the others nearby. Although the machine was stationary, the engine compartment was remarkably clean, with no fresh oil traces on the cylinder block or pump housings. I took a closer look, as this type of Chinese-made equipment is sometimes prone to leaks around the cylinder head gasket—but this particular unit showed no such issues. Grouser tips are not hooked nor flat much like a mid size excavator when they run in rock without a check of the tension it’s what kills you since they just need flipping or replacing, sprockets are worn but no teeth are hooked or otherwise chipped. Some scarring and rusting on the surface of the rollers, but no seized ones, idlers are similarly used, but not cooked.
Cab’s clean on the outside but I couldn’t get in gate till the operator came with the keys which i really could have been mistaken placement of the key in the lock somewhere, but either way, glass is not cracked and door seals all seem OK; all of which is important when trying to keep dirt out of the hydraulics and electrical. cylinders and boom are dry, no marks on the rods from witnesses (it will be unusual for any to last past the first month as a lot of guys remove the covers on the fittings), hoses don’t even have their protective sleeves on them (they can also get lost in the first month of operation), etc. The counterweight paint has faded but there are no cracking in the casting. There’s some swing bearing area underneath too, no oils puddling on the frame rails or on the motor mount, wait let me check the manifold again… yeah, just old dirt caked up on it, no new oil in there. Undercarriage frame isn’t bent and track frame isn’t twisted – sometimes you see that, when they get loaded crooked on lowboys, etc. A standard dig bucket with bucket, teeth and some cutting edge bub. Well it would be overcast during the inspection so couldn’t see everything perfect but to be honest this machine has no red flags, it was worked on but not abused and was probably being used for a municipal job or light commercial job.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY305H |
| Paint | Good |
| Cabin Glass | Ok |
| Cabin Door | Present |
| Seat | Ok |
| Boom Cylinder | Ok |
| Arm Cylinder | Ok |
| Bucket Cylinder | Ok |
| Hydraulic Hoses | Ok |
| Bucket Teeth | Worn |
| Bucket | Used |
| Tracks Left | Worn |
| Tracks Right | Worn |
| Track Pads | Used |
| Undercarriage | Dirty |
| Rollers | Ok |
| Sprockets | Ok |
| Idlers | Ok |
| Swing Bearing | Ok |
| Counterweight | Present |
| Engine Cover | Ok |
| Side Panels | Ok |
| Handrails | Present |
| Steps | Ok |
| Lights | Present |
| Mirrors | Present |
| Boom | Ok |
| Arm | Ok |
| Pins | Ok |
| Bushings | Worn |
| Hydraulic Lines | Ok |
| Slew Ring | Ok |
| Travel Motors | Ok |
| Final Drives | Ok |
| Grease Points | Ok |
| Oil Leaks | No |
| Fuel Leaks | No |
| Hydraulic Leaks | No |
| Safety Decals | Faded |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Back camera | Not visible |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Horn | Not visible |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Not visible |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Dashboard Screen, Gauges | Not visible |
| Operator Cabin Details | Air Conditioning & Heating System | Present |
| Operator Cabin Details | Cab Floor Covering | Not visible |
| Engine & Performance | Engine Model | Not visible |
| Engine & Performance | Engine Cooling System | Not visible |
| Engine & Performance | Exhaust System & Muffler | Not visible |
| Engine & Performance | Belts & Air/Oil Filters | Not visible |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Dirty, used |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used, ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used, ok |
| Exterior Condition & Visual Inspection | Lights | Present |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good, minor fade |
| Hydraulic System | Hydraulic Leaks | No visible leaks |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Not visible |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Status | Used, worn teeth |
| Attachments | Coupler status | Pin-on |
| Tracks & Undercarriage | Track Condition Left | Worn |
| Tracks & Undercarriage | Track Condition Right | Worn |
| Tracks & Undercarriage | Track Pads | Used, worn |
| Tracks & Undercarriage | Rollers | Ok, dirty |
| Tracks & Undercarriage | Sprockets | Ok |
| Tracks & Undercarriage | Idlers | Ok |
| Tracks & Undercarriage | Damages / Cuts | Muddy, normal wear |
Estimated Price
$37,500.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:LLC “Technotorg” (Technoshina)
Supplier Description:Technotorg is a leading supplier of heavy vehicle and construction machinery parts in Tajikistan, and an officially authorized agent for Russian KAMAZ and several international tire brands.
Supplier address:********** Dushanbe, 734000, Tajikistan
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.