2014 SANY SY245H Crawler Excavator
Condition:Used
Hours:5000
Country:Spain
Overview
| Brand | Sany |
|---|---|
| Model | SY245H |
| Country | Spain |
| Year | 2014 |
| Hours | 5000 |
| Operating Weight | 25.5 Tons |
| Bucket Capacity | 1.3 m³ |
| Condition | Used |
| Supplier Name | JBB Assets, S.L. |
Product Description
This excavator is located in a storage yard alongside other heavy equipment; its model designation is “SY245H,” placing it in the medium-sized excavator class with an operating weight of approximately 24–25 tons. The first thing you notice is the paint is still as lovely as when it left the factory, not an “uggs” look from being on three jobs already, the tracks are barely older looking dusty and when I looked at the pads they look as if they were used only about five per cent, they may well be a demo unit or they kept them for shows because the undercarriage is super clean! Free rolling with no wobble, factory fresh condition of rollers, no tracks thrown against the sprockets chew on sprockets. Interesting thing in the engine bay is that the covers are still there, the engine was gold-yellow (the colour I have always known Mitsubishi use for their oil pumps), the fittings were not stained, the filters looked as if they had not been changed ever or would have been very recently anyway, fuel filter still had the white case with no staining on it, no weepage from the headgasket, swing motor housing was dry (checked twice as I have read that SANY have a history of problems with swing bearing seals on the older models, but not on this one). Fact is, hoses still have factory wrapping that wouldn’t be present on a machine that had real time on his account.
Everything reveals itself in the Cabin: plastic still on seat, as if they just unwrapped it yesterday or a day later; boot marks and mud caked in the grooves on the floor mat; grips with joysticks that have no wear spots on them, where you’d stick your hands all day. Display screen with the protective film clinging to it. But Honestly is definitely just someone cranked it up perhaps 10 times to basically run it around the lot. Today it was quite humid, the glass does have some condensation, broke clear, was not cracked and door seals are tight. It was smooth when I had somebody run it for 30 minute, I didn’t get any jerking or squealing of the pin, the stick moves nice and smooth along the arc. There is no play in the bucket pins (should not shake). Then, underneath the tracks I manoeuvred around checking if there were any holes or cracks in the frame rails or anything, etc, and there were none, just a few dried bits of mud splatter which must have been from delivery. Solids: no chunks missing – counterweight. Either way the iron won’t leak and is clean. If a good value, definitely worth considering.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY245H |
| Paint | Good |
| Body Color | Yellow/Black |
| Logo | Present |
| Safety Label | Present |
| Warning Sticker | Present |
| Tracks | Good |
| Track Pads | New |
| Track Frame | Clean |
| Idler | Ok |
| Sprocket | Ok |
| Rollers | Clean |
| Boom | Good |
| Stick | Good |
| Bucket | Present |
| Cylinders | Clean |
| Hoses | Good |
| Protective Wrap | Present |
| Swing Motor | Present |
| Swing Bearing | Ok |
| Slew Ring | Good |
| Grease Fittings | Present |
| Hydraulic Pump | Yellow |
| Hydraulic Motor | Good |
| Control Valve | Present |
| Hoses | Black/Good |
| Fittings | Clean |
| Oil Filter | Present |
| Fuel Filter | Present |
| Manifold | Clean |
| Engine Cover | Black |
| Engine | Present |
| Radiator | Present |
| Air Filter | Present |
| Exhaust Manifold | Dirty |
| Intake | Present |
| Pipes | Good |
| Clamps | Present |
| Cab | Present |
| Glass | Clean |
| Door | Good |
| Pedals | Present |
| Monitor | Present |
| Control Panel | Present |
| Floor Mat | Present |
| Ceiling | Clean |
| Counterweight | Good |
| Rear Cover | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | New |
| Operator Cabin Details | Cab Doors & covers | Good |
| Operator Cabin Details | Control Levers, Control Stick | Present |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Operator Cabin Details | Dashboard Screen, Gauges | Present |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Engine & Performance | Engine Model | Mitsubishi |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Dirty |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks& seals | No visible |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Clean |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Present |
| Exterior Condition & Visual Inspection | Engine Hood | Yellow |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present |
| Exterior Condition & Visual Inspection | Boom Condition | Good |
| Exterior Condition & Visual Inspection | Arm Condition | Good |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good |
| Hydraulic System | Hydraulic Leaks | No visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Present |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Present |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Present |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Overall Track Condition | Good |
| Tracks Estimated Remaining Life % | Damages / Cuts | No visible |
Estimated Price
$32,500.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:JBB Assets, S.L.
Supplier address:********* 26323 Hormilla, La Rioja, Spain
JBB Assets, S.L.
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Eric Lin
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.