2016 Caterpillar 308E2 Mini Crawler Excavator
Condition:Used
Hours:2000
Country:Egypt
Overview
| Brand | Caterpillar |
|---|---|
| Model | 308E2 |
| Country | Egypt |
| Year | 2016 |
| Hours | 2000 |
| Operating Weight | 8.0 Tons |
| Bucket Capacity | 0.38 m³ |
| Condition | Used |
| Supplier Name | Egypco for Used Equipment |
Product Description
I tested this Cat 308E2 today; the tracks are not brand new, and there is some surface rust at the track shoe connections (a common occurrence for this model). The idlers and drive sprockets show signs of wear but no indications of excessive use or damage. There was no living in the cabin floor mat if that’s what you were expecting and the glass is not cracked but it could use a wipe, it’s easier to see dirt on the inside of my unit than in this one though that’s a plus, the seat fabric is fine no rips or tears, and the controls are working fine, they felt smooth when I pulled them down while riding on the bike, and there is a fire extinguisher present which is a good thing because half the time that’s missing too. No see chrome and clean no pitting on hydraulic rod on the main boom cylinder, boom and stick pins felt tight when I grabbed them, no slop.
Engine bay was side panels open – No pooling, no fresh oil on my notes which is what you’re looking for, hoses all were black rubber standard, no hosing cracking that really stood out at me, nope didn’t pull all the clamps off – but if there’s oil in the motor housing there’s oil out of sight from there anyway. Hydraulic block under the engine cover has multiple spools all fittings appear to be tight, aux lines already plumbed to the stick if buyer wants to add a hammer or grapple to the system they are up and running so they wouldn’t have to add anything. The undercarriage, as much as I could see without crawling underneath had no signs of a leak, drive or track frame were all as dirty as they always are and there were no oil or grease weeping seal leaks. In fact, during the inspection period it was very slightly damp so all was damp enough anyway but did not notice any fresh shining fluids. There is no “bucket on it” as such, it is a standard teeth dig bucket, there is a spare yellow bucket but I didn’t check that but I placed it by the other one. In general, the cat’s engine compartment was very clean with no smell of smoke or burnt up oil anywhere, and counterweight paint was worn in some areas, but no metal counterweight flaking or rotting. If it’s relevant to anybody it wasn’t an Operator’s manual in the seat pocket. Machine digs well. No cracks in Cab Glass. Would I consider it to purchase for my own hire fleet, or would I consider it for a job-site? Yeah, probably it’s used but it isn’t beat to heck either and it isn’t pristine, it’s just used.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | CAT |
| Model | 308E2 |
| Cab Glass | Dirty |
| Operator Seat | Used |
| Control Levers | Present |
| Safety Labels | Yes |
| Warning Stickers | Present |
| Interior Ceiling | Dirty |
| Floor Mat | Worn |
| Instrument Panel | Ok |
| Engine Compartment | Dirty |
| Hydraulic Pump | Yellow |
| Fuel Injection System | Present |
| Hoses | Used |
| Wiring Harness | Present |
| Engine Color | Yellow |
| Coolant Reservoir | Present |
| Alternator | Present |
| Hydraulic Lines | Present |
| Travel Motor | Present |
| Track Frame | Used |
| Track Shoes | Dirty |
| Track Bolts | Rusty |
| Sprocket | Worn |
| Idler Wheel | Dirty |
| Track Roller | Used |
| Blue Label | Present |
| Boom Cylinder | Good |
| Stick Cylinder | Good |
| Bucket Cylinder | Good |
| Hydraulic Hoses Boom | Used |
| Pin Connections | Present |
| Bucket Teeth | Present |
| Counterweight | Yellow |
| Engine Hood | Yellow |
| Fuel Tank | Yellow |
| Exhaust | Present |
| Air Filter | Present |
| Radiator Screen | Dirty |
| Platform Step | Dirty |
| Handrails | Present |
| Paint Overall | Used |
| Decals | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Used, ok |
| Operator Cabin Details | Cab Doors | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Present, work |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Present |
| Operator Cabin Details | Cab Floor Covering | Dirty |
| Operator Cabin Details | Cab Structure, Guard | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System | Present |
| Engine & Performance | Oil Filters | Ok |
| Engine & Performance | Coolant | Ok, white bottle |
| Engine & Performance | Leaks & seals | Minor possible |
| Engine & Performance | Fuel System | Ok |
| Exterior Condition & Visual Inspection | Main Frame | Used, dirty |
| Exterior Condition & Visual Inspection | Protective Covers | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Yellow, ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Present |
| Exterior Condition & Visual Inspection | Boom Condition | Used, yellow paint |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Yellow |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded yellow |
| Hydraulic System | Hydraulic Leaks | Minor maybe |
| Hydraulic System | Boom Hydraulic Jack | Yellow, ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Used |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
| Limited Functional Testing & Operation | Bucket Pins Condition | Used |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard size |
| Attachments | Status | Used worn |
| Attachments | Coupler status | Pin-on |
| Undercarriage | Track Shoes Left | Worn dirty |
| Undercarriage | Track Shoes Right | Worn dirty |
| Undercarriage | Track Frame | Used muddy |
| Undercarriage | Sprocket Left | Worn |
| Undercarriage | Sprocket Right | Worn |
| Undercarriage | Idler Left | Dirty used |
| Undercarriage | Idler Right | Dirty used |
| Undercarriage | Track Rollers | Used condition |
Estimated Price
$12,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Egypco for Used Equipment
Supplier address:********** New Nozha, Heliopolis, Cairo, Egypt
Egypco for Used Equipment
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Kevin Chen
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.