2016 Komatsu PC130 Crawler Excavator
Condition:Used
Hours:1900
Country:Colombia
Overview
| Brand | Komatsu |
|---|---|
| Model | PC130 |
| Country | Colombia |
| Year | 2016 |
| Hours | 1900 |
| Operating Weight | 13 Tons |
| Bucket Capacity | 0.53 m³ |
| Condition | Used |
| Supplier Name | Darcomex S.A.S. |
Product Description
We were lucky this time and found another Komatsu excavator in great condition, this Komatsu PC130. Makes no hesitation to start up cold, has no hydraulics lag after it warms up probably after 30 seconds or less, and bucket curl action is pretty fast (no lag in cylinders, which means that the seals are holding pressure where they should be). This wondering about some wear or the operator liked the red wraps on the armrests and controls, cab seat doesn’t have split joystick boots, but has these red wrapped ones instead, and the actual seat cushion is firm. Clean, no crack and floor mat in place but dusty, not torn.
I played more with the engine compartment as that’s where the money is. No seepage (wait let me check the main valve block again – sometimes they get a very small seepage around the porting) sitting or running in dry dirt – hoses all look dry and clamps are tight. The radiator fins are not bent and the coolant overflow is not crusty so I would say it hasn’t been cooked. Fuel lines are all straight without any evidence of any kinked tubing or rubbing, air filter housing is sealed up correctly. I didn’t have any tools and I hammered the cover off anyways with the house, but as I shook it from side to side, no slop, no clunking. Boom pivot same thing – cycled up to full AND down to full – smooth.These track tensioners were not rusty and were black not rusty, the tension looks good they were not over tightened when I kicked them and the rollers spin free. There is cosmetic scuffing on Paint’s counterweight.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | Komatsu |
| Model | PC130 |
| Paint | Good |
| Boom | Ok |
| Arm | Ok |
| Bucket | Used |
| Bucket Teeth | Worn |
| Tracks | Good |
| Track Pads | Present |
| Upper Structure | Ok |
| Cab Glass | Clean |
| Operator Seat | New |
| Seat Belt | Red |
| Interior | Clean |
| Joysticks | Present |
| Control Levers | Ok |
| Engine Access | Ok |
| Hydraulic Hoses | Present |
| Hose Clamps | Ok |
| Cylinder Rods | Clean |
| Pin Bushings | Ok |
| Boom Cylinder | Ok |
| Arm Cylinder | Ok |
| Hydraulic Pump | Yellow |
| Valve Block | Yellow |
| Hydraulic Lines | Black |
| Fuel Lines | Present |
| Coolant Hoses | Present |
| Electrical Wiring | Present |
| Cable Routing | Ok |
| Main Valve | Yellow |
| Control Valve | Present |
| Pressure Sensors | Present |
| Oil Leaks | No |
| Hydraulic Leaks | No |
| Fuel Leaks | No |
| Grease Points | Ok |
| Boom Welds | Good |
| Arm Welds | Good |
| Frame | Good |
| Counterweight | Present |
| Rear Hood | Ok |
| Side Panels | Ok |
| Engine Cover | Present |
| Safety Guards | Present |
| Warning Labels | Present |
| Undercarriage | Good |
| Idlers | Ok |
| Sprockets | Ok |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Present |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Seat and Arm Support | New, red belt |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Present, ok |
| Operator Cabin Details | Windows and Mirrors | Clean |
| Operator Cabin Details | Air Conditioning & Heating System | Present |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Cab Structure, Guard | Ok |
| Operator Cabin Details | Engine Cooling System | Present |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Coolant | Hoses present |
| Engine & Performance | Leaks & seals | No visible leaks |
| Engine & Performance | Main Frame & Track Frame | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Present |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Ok |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good, minor dirt |
| Exterior Condition & Visual Inspection | Hydraulic Leaks | No |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Yellow, clean |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Swivel Joint | Present |
| Transmission & drive train | Boom Pins Condition | Ok |
| Limited Functional Testing & Operation | Arm Pins Condition | Ok |
| Limited Functional Testing & Operation | Bucket Pins Condition | Ok |
| Limited Functional Testing & Operation | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used, worn teeth |
| Attachments | Coupler status | Pin-on |
| Attachments | Track Pad Type | Rubber |
| Tracks Estimated Remaining Life % | Track Shoe Width | 450mm |
| Tracks Estimated Remaining Life % | Damages / Cuts | Minor wear |
Estimated Price
$12,900.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Darcomex S.A.S.
Supplier address:************ Bogotá, Colombia
Darcomex S.A.S.
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Sales Consultant
About the Author: Panzhendong
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.