2018 Caterpillar 320 Crawler Excavator
Condition:Used
Hours:3800
Country:Belarus
Overview
| Brand | Caterpillar |
|---|---|
| Model | 320 |
| Country | Belarus |
| Year | 2018 |
| Hours | 3800 |
| Operating Weight | 20 Tons |
| Bucket Capacity | 1.0 m³ |
| Condition | Used |
| Supplier Name | JSC “Minsk Wheel Tractor Plant” (MZKT – Volat) |
Product Description
The place where we are testing the machine today is a construction site.This cat 320 excavator, mud everywhere, had to kick a lot of mud off the tracks to check underneath them, when fired up the engine sounds clean and there is no smoke being vented, the valve cover and injector lines are tight but there is a bit of rust around the exhaust manifold and the turbo housing, nothing crazy, just a bit of surface rust from it being exposed out there, it’s been rained on a few times since. the sprocket and idler teeth have some wear but I can’t tell any percentage because everything was caked in mud, would need to jet wash it to get a proper look at track wear before it could be called a final inspection. the swing bearing area is caked with mud, no real obvious cracks in the ring gear teeth that i’m able to see at this time but again, not a final inspection without a hosing down.
Hydraulics, most of this area was pretty original look, the hose coiled on the back of the turntable is braided and in good shape with no fraying; the wiring harness has a few tape repair points but no connectors that are giving away themselves for now; fuel injection pump and lines are all dry, there is no weeping anywhere I applied pressure, this has definitely been outdoors its entire life.On this group, I didn’t get good photos of interior so can’t say dirty or clean – will need to get more photos before I sign off on that portion – again, my fault, not the machines. There’s paint off around the door, and the counter weight corner to the rear is scratched up and there’s even a dent on the back left panel. This is as if it was used around the house and not in a showroom. Still plastic wrapped on counter weight cover, a little odd for a used machine but doesn’t say anything regarding mechanical condition. Machine digs well from what what I saw the operator. No boom or arm pins play evidence by hand and upon visual inspection, while it was cycling. The fins in the cooling pack up front are filled with dust, would like to have it cleaned out before the summer heat becomes a problem or it’ll run hot.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | CAT |
| Model | 320 |
| Paint | Good |
| Cab Glass | Ok |
| Cab Door | Ok |
| Seat | Used |
| Console | Used |
| Boom | Good |
| Arm | Good |
| Bucket | Used |
| Tracks | Used |
| Track Frame | Dirty |
| Swing Bearing | Used |
| Swing Bearing Paint | Peeled |
| Slew Ring Bolts | Ok |
| Undercarriage | Dirty/Muddy |
| Idler | Ok |
| Sprocket | Ok |
| Radiator | Dirty |
| AC Condenser | Present |
| Intercooler | Present |
| Oil Cooler | Present |
| Cooling Fins | Bent/Minor |
| Hose Clamps | Ok |
| Hydraulic Pump | Present |
| Swing Motor | Present |
| Main Control Valve | Present |
| Hydraulic Lines | Used |
| Hydraulic Fittings | Ok |
| Rust on Fittings | Minor |
| Engine | CAT 6-cyl |
| Engine Cover | CAT yellow |
| Valve Cover | Good |
| Exhaust Manifold | Rusty |
| Turbo | Present |
| Alternator | Present |
| Air Filter | Present |
| Oil Filter | Present |
| Coolant Bottle | Dirty |
| Loose Tools in Bay | Present |
| Blue Barrel on Frame | Present |
| Protective Film | Partial |
| Warning Stickers | Present |
| QR Code Sticker | Present |
| Oil Leak | No visible |
| Water Leak | No visible |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Boom Hydraulic Check Valve | Ok |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Ok |
| Key Features & Condition | Back Camera | Yes |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors & Covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Washer, Wipers | Ok |
| Operator Cabin Details | Air Conditioning & Heating | Present |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | CAT 6-cyl |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Rusty |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Engine & Performance | Coolant | Present, jug dirty |
| Engine & Performance | Leaks & Seals | No visible leak |
| Engine & Performance | Alternator | Present |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Partial wrap on hood |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers & Catwalk | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Ok |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint | Good, minor wear |
| Exterior Condition & Visual Inspection | Loose Items in Engine Bay | Yes, poles present |
| Hydraulic System | Hydraulic Leaks | No visible |
| Hydraulic System | Boom Hydraulic Jack | Ok, chrome intact |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Swing Motor | Present, ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok, chrome intact |
| Hydraulic System | Arm Hydraulic Jack | Ok, chrome intact |
| Hydraulic System | Hose Condition | Used, rust spots on fittings |
| Hydraulic System | Main Control Valve | Ok |
| Cooling System | Radiator | Dirty, fins ok |
| Cooling System | Intercooler | Present, dirty |
Estimated Price
$26,200.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:JSC “Minsk Wheel Tractor Plant” (MZKT – Volat)
Supplier Description:MZKT (Minsk Wheel Tractor Plant) is renowned worldwide for its “Volat” brand.
Supplier address:********** Minsk, 220021, Belarus
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.