2026 All-new CAT 374 Tracked Excavator

This is a brand-new Caterpillar 374 heavy excavator that is practically perfect. This behemoth is very suitable for open-pit mining and is simply a mechanical monster that can greatly speed up the work process.Hylics on the boom and stick appear not to have been used at all, chrome on all three cylinders (boom, stick and bucket) is clean and no scoring or not weepy at rod seals. It under-needs was dry, I mean, I went and looked at the track rollers on the right side again and it’s just old dirt being packed in and not a new leak, had no wet area around the seal face. I spend most of my time in the undercarriage, judging by this being grouser height (close to full), no real rounding down of shoes, no sag in links between the rollers (pins and bushings not stretched), sprocket teeth still full profile (not hooked) and the idlers still square on (no wobbling that I can see). track tension seemed to be fine without having to pull anything. Bottom rollers/trip off the heat also no leak where the trip off is, would expect to find them weeping if they haven’t moved around very much on a machine this size and they have been sitting in a yard. These aren’t weeping.The part that told me the most was seat still with the factory plastic headrest (never pulled off) and the red covers over the arm rest & joysticks and the red rubber floor mats that had the mould texture still on as this will soon wear out once the operator starts using it and the CAT monitor that had no scratches or fingerprint. This machine has not had work carried out. The only thing on this whole machine that shows any contact with “outside dirt” is the tip of the bucket teeth that shows some wear, but not much.