2018 SANY SY215C Crawler Excavator
Condition:Used
Hours:3000
Country:Morocco
Overview
| Brand | Sany |
|---|---|
| Model | SY215C |
| Country | Morocco |
| Year | 2018 |
| Hours | 3000 |
| Operating Weight | 21.5 Tons |
| Bucket Capacity | 0.93 m³ |
| Condition | Used |
| Supplier Name | Hamza Al-Fassi |
Product Description
I peeled the plastic protective film off the seat and roof of this Sany 215C; the engine sounded like it was in good condition, and the fact that the plastic film remained on the seat and roof suggested that the machine had either been well-maintained or had been sitting idle for a long time awaiting sale. buttoned down tight and valve cover wasn’t weeping around the gaskets which is usually a tell on these older mitsutoys. The hose appears factory with no cracks and dry rot, the pump housing is dry (hold on I need to check that one again, there’s usually this kind of oily residue that looks like dust, but it is old pump oil… No, it is just dirt, there is no fresh oil leaks in the hydraulics). I mean it’s not like this thing was swinging heavy buckets in rock all day and every day! Rollers spin free. Tracks tight. There is some dirt on the edge of bucket being left on there is still life left in cutting edge.
Under the plastic the interior of the cab is nice, no grease splattered everywhere on the glass, no burnt-looking holes in the upholstery or anything and no cigarette burns or marks and all the floor is still covered in tape. No jerks or hunting when I took them out for a test drive, immediate valve response was noted, meaning the system is bled out of any air. Today was a very moist day with all the sticky feel to it, but I did finally get a chance to get a good look at the boom and stick cylinders, chrome on rods wasn’t pitted and seals didn’t leak. Boom still in like-new paint, no huge gouges or repaint indicating it was at a location it didn’t belong. There are no cracks with Counterweight, no welds, and frame rails are straight, although it does have some decorative sticker on it. Didn’t this SY215C look like a yard queen or a rental that got babied, hours are low (or at least so hours says) or something?
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY215C |
| Air Filter | Dirty |
| Radiator | Ok |
| Hoses | Good |
| Belts | Present |
| Oil Level | Ok |
| Coolant | Ok |
| Fuel Filter | Present |
| Battery | Ok |
| Wiring | Good |
| Hydraulic Pump | Good |
| Control Valve | Ok |
| Cylinders | Used |
| Hoses Hydraulic | Good |
| Fittings | Ok |
| Leaks | No |
| Boom | Ok |
| Stick | Ok |
| Bucket | Worn |
| Pins | Used |
| Bushings | Worn |
| Cylinder Rods | Ok |
| Grease Points | Ok |
| Tracks | Worn |
| Sprockets | Used |
| Idlers | Ok |
| Rollers | Used |
| Track Shoes | Worn |
| Tension | Ok |
| Undercarriage | Dirty |
| Cab Glass | Ok |
| Seat | Old |
| Controls | Ok |
| Monitor | Present |
| Mirrors | Present |
| Wipers | Present |
| Safety Labels | Faded |
| Decals | Faded |
| Paint Body | Ok |
| Paint Boom | Faded |
| Rust | Minor |
| Dents | No |
| Covers | Present |
| Handrails | Ok |
| Steps | Dirty |
| Red Ribbons | Present |
| Protective Wrap | Present |
| Engine Cover | Ok |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Boom Hydraulic Check Valve | Ok |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Ok |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Seat and Arm Support | Old, wrapped |
| Operator Cabin Details | Cab Doors | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Operator Cabin Details | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | Mitsubishi |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Oil Filters | Present |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks | Minor |
| Engine & Performance | Main Frame | Dirty |
| Exterior Condition & Visual Inspection | Protective Covers | Wrapped present |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Muddy |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Hydraulic Leaks | No |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Bucket Swing cylinder | Ok |
| Hydraulic System | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Limited Functional Testing & Operation | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Attachments | Size | 600mm |
| Tracks Estimated Remaining Life % | Type | Steel |
| Tracks Estimated Remaining Life % | Damages / Cuts | Worn, dirty |
Estimated Price
$32,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Hamza Al-Fassi
Supplier address:********** Km 7, Casablanca, Morocco
Hamza Al-Fassi
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.