2018 SANY SY245H Crawler Excavator
Condition:Used
Hours:4600
Country:Morocco
Overview
| Brand | Sany |
|---|---|
| Model | SY245H SIC |
| Country | Morocco |
| Year | 2018 |
| Hours | 4600 |
| Operating Weight | 24.5 Tons |
| Bucket Capacity | 1.3 m³ |
| Condition | Used |
| Supplier Name | Rachid Benjelloun |
Product Description
Out today to a muddy yard, this SANY SY245H SIC it has the Mitsubishi engine under the hood the engine cover had a bit of a dust-on and I opened this up, no oil pooled anywhere, filter look like they have been changed fairly recently but are dirty from site work. The metal is not beaten up on Counterweight, it has some goofy spray paint tags on it purple or pink graffiti type thing. Nothing to worry about with the bucket teeth, in fact, it is what you would expect, wear typical to a dig job with a bucket.
Then I got this interest in hydraulics as that is typically where leaks are however I scooted around the swing motor area, main valve, pump housing, all the fittings and lines and believe it or not (I checked my notes again) no wet spots and no fresh drips, just old dust and job site grime adhered to everything. On the boom and stick the cylinders have some crud on the rods but they are dry, also don’t see any cracks or weeping in the cylinders which is what you want to look for on a used machine. No oil seeps from visible final drives; final drives are buried in the mud, so I couldn’t get a 100% look at the final drives. The surface rust present on pins on boom is common; they are very tight and there was no slop when I did a cycle of them. All glass is in tact on front and rear of the cab.Unable to get in for hour meter reading.The first red flag I look for on these Chinese is an oil bath in the engine compartment and this one isn’t soaking in the engine compartment so to speak, so that’s a plus for me. Undercarriage again, maybe about half way through it’s service life, again dependent on how heavily you drive it. Machine digs fine. No smoking. But, in terms of price, Honestly, this is a good work unit, NOT show room but also not a pile of crap either, just needs a pressure wash and this’d take reasonable pictures.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY245H SIC |
| Engine | Mitsubishi |
| Paint | Faded |
| Cab Glass | Dirty |
| Seat | Used |
| Controls | Present |
| Monitor | Present |
| Safety Labels | Yes |
| Boom | Good |
| Arm | Good |
| Bucket | Worn |
| Bucket Teeth | Used |
| Pins | Rusty |
| Bushings | Worn |
| Boom Cylinders | Ok |
| Arm Cylinder | Ok |
| Bucket Cylinder | Ok |
| Hydraulic Hoses | Old |
| Hose Protectors | Present |
| Main Pump | Ok |
| Control Valve | Present |
| Swing Motor | Present |
| Travel Motors | Present |
| Filters | Dirty |
| Engine Bay | Dirty |
| Radiator | Dirty |
| Oil Leaks | Minor |
| Hydraulic Leaks | No |
| Tracks | Worn |
| Sprockets | Worn |
| Idlers | Ok |
| Rollers | Used |
| Undercarriage | Dirty |
| Counterweight | Good |
| Handrails | Present |
| Steps | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Label | No |
| Key Features & Condition | Auto Lube System | No |
| Key Features & Condition | Rear Camera | Yes |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hammer Lines | Yes |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Horn | Yes |
| Operator Cabin | Seat Armrest | Used |
| Operator Cabin | Cab Doors | Ok |
| Operator Cabin | Control Levers | Ok |
| Operator Cabin | Windows Mirrors | Dirty |
| Operator Cabin | Wipers | Ok |
| Operator Cabin | Floor Mat | Dirty |
| Operator Cabin | Cab Guard | No guard |
| Engine Performance | Fuel System | Electronic |
| Engine Performance | Engine Brand | Mitsubishi |
| Engine Performance | Cooling System | Ok |
| Engine Performance | Exhaust Muffler | Rusty |
| Engine Performance | Belts Filters | Ok |
| Engine Performance | Coolant | Ok |
| Engine Performance | Leaks Seals | Minor |
| Exterior Condition | Main Frame | Muddy |
| Exterior Condition | Covers Sheets | Ok |
| Exterior Condition | Engine Hood | Ok |
| Exterior Condition | Side Doors | Ok |
| Exterior Condition | Steps Rails | Dirty |
| Exterior Condition | Boom | Used |
| Exterior Condition | Arm | Used |
| Exterior Condition | Lights | Ok |
| Exterior Condition | Battery | Ok |
| Exterior Condition | Counterweight | Ok |
| Exterior Condition | Paint | Faded |
| Hydraulic System | Hyd Leaks | Minor |
| Hydraulic System | Boom Cylinder | Ok |
| Hydraulic System | Hyd Pump | Ok |
| Hydraulic System | Arm Cylinder | Ok |
| Hydraulic System | Bucket Cylinder | Ok |
| Hydraulic System | Swing Cylinder | Ok |
| Hydraulic System | Hoses | Old |
| Transmission Drive | Swivel Joint | Ok |
| Functional Test | Boom Pins | Worn |
| Functional Test | Arm Pins | Worn |
| Functional Test | Bucket Pins | Worn |
| Undercarriage | Track Type | Steel |
| Undercarriage | Track Width | 600mm |
| Undercarriage | Track Pads | Worn |
| Undercarriage | Track Links | Used |
| Undercarriage | Sprockets | Ok |
| Undercarriage | Idlers | Ok |
Estimated Price
$28,500.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Rachid Benjelloun
Supplier Description:A private supplier specializing in refurbished used generator sets and small to medium-sized excavators (under 15 tons).
Supplier address:********** Casablanca, Morocco
Rachid Benjelloun
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.