2019 YANMAR ViO80 Mini Excavator
Condition:Used
Hours:2000
Country:United Arab Emirates
Overview
| Brand | Yanmar |
|---|---|
| Model | ViO80 |
| Country | United Arab Emirates |
| Year | 2019 |
| Hours | 2000 |
| Operating Weight | 8.2 Tons |
| Bucket Capacity | 0.28 m³ |
| Condition | Used |
| Supplier Name | Al-Quds Machinery (Arabian Jerusalem Equipment Trading) |
Product Description
The Yanmar ViO80 I inspected today was parked between a Kobelco machine and a Dynamic road roller; the engine hood was already open, so I started there. Standard setup; Red Painted body and boom, black counterweight. That means the Yanmar hydraulic pump is orange, and fuel filter is white with a red cap, and the air filter housing is round and metallic – I looked around the base and under the machine for wetness, turns out there weren’t, but there is some surface corrosion on the brass coloured rotary bearing housing, but it wasn’t weeping or pooling anywhere which is good on this particular mini ex.
The cab’s remarkably clean for a rental unit, or whatever this was, the gray seat with no rips, the tan rubber floor mat – someone recently hosed it off it appears, the glass is all intact, the console on the left has the digital screen and has two joysticks on the armrests as is typical. Holly Broadwood Amber door mirror(s) with both. For the lack of a better word it was kind of bright out, the screen was difficult to see, but there was no cracks in the panels, everything looked fine in terms of the buttons and switches. Rubber tracks obviously. Truthfully for the number of hours I put on this walk is not terrible at all at the bottom. Again, in the engine compartment, the green fluid is visible in the coolant reservoir and I saw multiple black hydraulic lines in every direction (no cracking on the hoses that I could see), fuel system components seem to be tight, exhaust warning sticker on not to open hot, standard Yanmar. Those black hydraulic cylinders were red and chrome with no scoring when I slid my fingers down them and bucket attached with teeth. Visually inspected the pins and bushings for sloppiness, the boom extends and retracts smoothly based on how it was sitting fully up in one of the shots. The flat black color is seen at Counterweight with no big gouges. Again, tracks have the typical wear pattern and still have some miles to go. I didn’t see any smoking. If you’re considering buying it as used — it’s not that bad — then be sure to evaluate it under load and cycle everything hot first before wiring the money, photos don’t tell everything and I did not get to fire it up today.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | YANMAR |
| Model | ViO80 |
| Paint | Good |
| Cab Glass | Good |
| Seat | Ok |
| Control Levers | Good |
| Pedals | Ok |
| Dashboard | Good |
| Warning Labels | Present |
| Safety Stickers | Yes |
| Antifreeze Label | Present |
| Burn Hazard Warning | Yes |
| Engine Cover | Good |
| Air Filter | Present |
| Fuel Filter | Present |
| Oil Filter | Present |
| Hydraulic Pump | Good |
| Hoses | Ok |
| Connectors | Present |
| Quick Couplers | Present |
| Cooling System | Good |
| Radiator | Good |
| Exhaust Pipe | Good |
| Muffler | Present |
| Tracks | Used |
| Track Pads | Ok |
| Undercarriage | Dirty |
| Idler | Good |
| Sprocket | Ok |
| Boom | Good |
| Arm | Good |
| Bucket | Present |
| Hydraulic Cylinders | Ok |
| Pins | Present |
| Bushings | Ok |
| Engine Oil | Present |
| Hydraulic Oil | Present |
| Coolant | Present |
| Wiper | Present |
| Mirrors | Present |
| Work Light | Present |
| Warning Beacon | Yes |
| Counterweight | Good |
| Rear Hood | Good |
| Side Covers | Ok |
| Access Panels | Present |
| Wiring | Ok |
| Hydraulic Lines | Good |
| Fuel Lines | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | Hydraulic type |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Seat and Arm Support | Good |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Dashboard Screen, Gauges | Analog type |
| Operator Cabin Details | Warning alarms message | Present |
| Operator Cabin Details | Washer, Wipers | Present |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Coolant | Green visible |
| Engine & Performance | Leaks& seals | None visible |
| Engine & Performance | Fuel Filter | Present |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Dirty |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used, ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used, ok |
| Exterior Condition & Visual Inspection | Lights | Work light present |
| Exterior Condition & Visual Inspection | Counterweight | Solid type, ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good, glossy |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Lines | Multiple colors present |
| Hydraulic System | Quick Connectors | White/colored fittings |
| Limited Functional Testing & Operation | Arm Pins Condition | Present |
| Limited Functional Testing & Operation | Bucket Pins Condition | Present |
| Attachments | Attachments model | Standard bucket |
| Attachments | Size | Medium |
| Attachments | Status | Used |
| Attachments | Coupler status | Hydraulic quick |
| Tracks Estimated Remaining Life % | Pads Condition | Used, ok |
| Tracks Estimated Remaining Life % | Type | Rubber |
| Tracks Estimated Remaining Life % | Damages / Cuts | Normal wear |
| Tracks Estimated Remaining Life % | Undercarriage | Dirty |
Estimated Price
$11,300.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Al-Quds Machinery (Arabian Jerusalem Equipment Trading)
Supplier Description:Al-Quds Machinery is one of the most influential used machinery traders in the Sharjah Industrial Area, specializing in the import and export of large earthmoving machinery.
Supplier address:********** Sharjah, United Arab Emirates
Al-Quds Machinery (Arabian Jerusalem Equipment Trading)
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Kevin Chen
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.