2020 KOBELCO SK380XD Large Crawler Excavator
Condition:Used
Hours:4700
Country:Kuwait
Overview
| Brand | Kobelco |
|---|---|
| Model | SK380XD |
| Country | Kuwait |
| Year | 2020 |
| Hours | 4700 |
| Operating Weight | 38 Tons |
| Bucket Capacity | 1.9 m³ |
| Condition | Used |
| Supplier Name | Mohammed Al-Mutairi |
Product Description
Tracks on this Kobelco SK380XD coupled to Red Trucks, the teal coloured one next to the red trucks, it has some dried mud on its tracks after some job done last week, as far as I can tell it’s holding the surface of the grouser bars and, it’s links aren’t spread to bare metal, there’s some rust on exposed metal on it, but not such to make me think it was in bad need of repair, really! The rollers and idlers are not sticking out anywhere, I couldn’t get a perfect read but when you rock it nothing is wobbling as in is buried in dirt. Bucket’s standard digging rig configuration (steel teeth with earth packed in corners), boom and stick cylinders just fine with no leaking seals on sight after rechecking the pump area, no fresh oil on ground and no oil on the final drives which surprisingly was better than I had hoped for one that’s been working hard.
This floor mat is so dirty with dried dirt everywhere and looks like somebody ran this through the swamp but the seat is fine, just a bit dusty and all the glass is fine—sometimes find that the glass is missing. Ceiling’s speaker’s here, Overhead’s workin’ though, That floor man it’s bad, like they didn’t sweep it out once. On the engine side there is the red flexible radiator hose mounted, no oil splatter on the side of the compartment or oil pooling, Donaldson filter and that CHANGJR oil filter is on the engine. Not sure when these were last changed and the locations listed above are currently in place. I ran my hand under a few quick connect lines, no problem with any being leaking active, but some grime is on the quick connects of the hydraulic lines. There was a slight cloudy nature of the day during inspection but it didn’t make the lighting too difficult, I managed to get quite a few angles. The paint on boom and panels faded, nothing structural is scuffed, its counterweight has a couple light scuffs, but very minor – the decals are still legible, and the 380XD model number is still clearly visible on both sides. the characters on the weight can be translated to “Chinook. No major dents and no meh glass, the cab doors hinges do not sag. To be honest this is a heavily used but not abused vehicle, if anyone is thinking of purchasing as it needs an undercarriage checkup. I would want to try running it under load and listening to the pump whine but if it passes the test vis-à-vis checking it out then it should be OK. It doesn’t have to be perfect but it’s just as well it works.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | KOBELCO |
| Model | SK380XD |
| Paint | Faded |
| Cab Glass | Dirty |
| Seat | Used |
| Seat Belt | Present |
| Floor Mat | Dirty |
| Pedals | Worn |
| Control Levers | Ok |
| Dashboard | Dusty |
| Monitor | Present |
| Speakers | Present |
| Roof Lights | Present |
| Door Hinge | Ok |
| Steps | Muddy |
| Handrails | Rusty |
| Engine Cover | Present |
| Radiator Hose | Red/Black |
| Air Filter | Present |
| Engine | Visible |
| Fuel Filter | Present |
| Battery | Present |
| Wiring | Ok |
| Hydraulic Tank | Present |
| Hydraulic Motor | Black |
| Main Pump | Present |
| Travel Motor | Black/Dirty |
| Final Drive | Used |
| Track Chains | Worn |
| Track Shoes | Muddy |
| Track Rollers | Dirty |
| Idler Wheel | Worn |
| Sprocket | Used |
| Boom Cylinder | Ok |
| Arm Cylinder | Present |
| Bucket Cylinder | Present |
| Hydraulic Lines | Multiple |
| Quick Coupler Fittings | Present |
| Oil Leak | Minor |
| Grease Points | Used |
| Bucket Teeth | Worn |
| Bucket Pin | Present |
| Boom Pin | Ok |
| Stick Pin | Ok |
| Counterweight | Present |
| Slew Ring | Hidden |
| Safety Labels | Faded |
| Warning Stickers | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Quick Coupler | Yes, hydraulic type |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Present |
| Operator Cabin Details | Cab Floor Covering | Dirty |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Engine & Performance | Engine Cooling System | Present |
| Engine & Performance | Exhaust System & Muffler | Present |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Leaks& seals | Minor leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Present |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Rusty |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Battery Check | Present |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Present |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Tracks Condition | Track Chain | Worn |
| Tracks Condition | Track Shoes | Muddy |
| Tracks Condition | Track Rollers | Dirty |
| Tracks Condition | Idler Condition | Worn |
| Tracks Condition | Sprocket Condition | Used |
Estimated Price
$41,300.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Mohammed Al-Mutairi
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Eric Lin
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.