2021 XCMG XE135D Crawler Excavator
Condition:Used
Hours:5666
Country:Saudi Arabia
Overview
| Brand | XCMG |
|---|---|
| Model | XE135D |
| Country | Saudi Arabia |
| Year | 2021 |
| Hours | 5666 |
| Operating Weight | 13.5 Tons |
| Bucket Capacity | 0.6 m³ |
| Condition | Used |
| Supplier Name | خالد محمد |
Product Description
After opening the engine hood of this XCMG 135D excavator, I inspected it immediately: the radiator fins showed no signs of dust accumulation or clogging (and the core was not deformed); the coolant hoses had been replaced with aftermarket red silicone ones (in my experience, these are more durable than the OEM parts); and upon inspection, I found the radiator cap screwed on tightly and the interior of the reservoir tank remarkably clean. There is some oil staining on the housing & fittings – umm let me look on the ground around it because we have this type of oil seepage on a machine of this type, I would say normal for the number of hours – unless the buyer wants it clean after the dump runs in the mud all day, that’s unrealistic.
Boom and stick cylinders are typical paint-wear and there is a little rust up top on the rods but no scoring that I could feel, pins are tight, no slop in bucket linkage and it digs smooth and doesn’t hunt when pressure is applied. The interior of the cab is muddy—operator has been following mud in and some of the dust is on the edges of the screen but the display still operates, all gauges are in the “green” and there was little fuel in the system. Not, during the inspection the weather was cloudy and windy as I didn’t dial it up hard, but did a full cycle test and all loaded clean. The teeth on the forks are only about 40% consumed. Paint is beaten up with scratching all over the body and counter weight typical for a site machine, no dents and / or cracks in structural areas. No smoke on start, idle and full load were good with no unusual sounds and the air filter housing appeared to be in good condition. There’s some grime on the hydraulic lines in the engine bay and some of the lines are getting cracked on the surface, but not split or weeping, I’d say replace a couple thing’s I’d feel better about in a year. Overall it’s a working machine, used but not ‘used down’, if you need it tomorrow then this machine will dig it.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | XCMG |
| Model | XE135D |
| Hours | 5,666h |
| Paint | Faded |
| Body | Dirty |
| Cab Glass | Ok |
| Seat | Used |
| Display Screen | Ok |
| Engine Radiator | Dirty |
| Cooling Fan | Present |
| Hydraulic Pump | Used |
| Control Valve | Old |
| Hydraulic Hoses | Worn |
| Hose Clamps | Rusty |
| Oil Leak | Yes |
| Hydraulic Fittings | Used |
| Undercarriage | Dirty |
| Track Pads | Worn |
| Track Links | Muddy |
| Rollers | Used |
| Boom | Ok |
| Stick | Ok |
| Bucket | Worn |
| Bucket Teeth | Present |
| Boom Cylinder | Used |
| Stick Cylinder | Ok |
| Bucket Cylinder | Present |
| Hydraulic Lines | Old |
| Electrical Wiring | Present |
| Engine Bay Access | Ok |
| Safety Labels | Faded |
| Fuel Level | Good |
| Water Temp | Normal |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Boom Hydraulic Check Valve | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Present |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok, no guard |
| Operator Cabin Details | Electrical System | Ok |
| Operator Cabin Details | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Dirty |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks& seals | Minor leaks |
| Engine & Performance | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Used |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Present |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | 600mm approx |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
Estimated Price
$15,700.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:خالد محمد
Supplier Description:A private supplier located in the Asfan Machinery Market in Jeddah specializes in the recycling, refurbishment, and sale of used diesel generator sets and air compressors.
Supplier address:********* 23828, Saudi Arabia
خالد محمد
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Eric Lin
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.