2021 XCMG XE60DA Crawler Excavator
Condition:Used
Hours:3600
Country:United Kingdom
Overview
| Brand | XCMG |
|---|---|
| Model | XE60DA |
| Country | United Kingdom |
| Year | 2021 |
| Hours | 3600 |
| Operating Weight | 6.0 Tons |
| Bucket Capacity | 0.3 m³ |
| Condition | Used |
| Supplier Name | Colin W. Parker |
Product Description
The 6-ton class (approximately) XCMG XE60DA PLUS enclosed cab and front blade is ideal for the grading type work. The bucket teeth are worn down and the normal size of the bucket is 0.2-0.3 cubic meter size, nothing special. The whole boom and body panels are faded paint, the only scratches are on the counterweight and not of any consequence whatsoever, cosmetic only. When I inspected the hydraulic lines at the arm connection there was a lot of hoses there and that it looked fine, but hard to tell as the lines were dirty so didn’t get to wipe them all down.
It’s in the engine compartment where it gets really interesting; coolant reservoir level is low, pink fluid is present, but definitely needs topping up before you really push it to the limits. fuel filter bowl – there’s sediment there, but not too bad – it’s probably time to change it. Oil filter is of those blue after market ones, oil block has some oil residue/dirt around the bottom, wait let me see the pump area again… yep, old oil and mud around the hydraulic pump area, but I can’t see any active drips or wet spots just old oil and dirt. No new leaks (that I was able to locate). There’s quite bit of dust on the swing motor housing to really discern anything without cleaning it up. Track tension appears to be low, may need to be adjusted. I don’t know how fast the machine runs, but this yard guy told me it runs just fine. I didn’t park it today because they had it parked tight between two other units, so I don’t know how fast it runs. Undercarriage has surface rust on links and no cracks to be seen, sprocket teeth are worn but are still usable. Idle wheels (rollers) are not toothed. The age and number of hours this thing seems to have probably makes it average condition, nothing special, nothing “trashed” just some work needs to be done on it– a maintenance tune up and some track work soon. I could see the pins seemed to have good tension, but didn’t swing the boom around to try those pins.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | XCMG |
| Model | XE60DA |
| Paint | Faded |
| Decals | Worn |
| Cabin Glass | Dirty |
| Door Seal | Old |
| Seat | Used |
| Controls | Present |
| Pedals | Worn |
| Floor Mat | Dirty |
| Warnings | Present |
| Engine Cover | Dirty |
| Air Filter | Present |
| Fuel Filter | Present |
| Coolant Bottle | Present |
| Hoses | Old |
| Wiring | Present |
| Boom Cylinder | Ok |
| Arm Cylinder | Ok |
| Bucket Cylinder | Ok |
| Hydraulic Lines | Present |
| Quick Coupler | Yes |
| Pivot Pins | Worn |
| Grease Points | Dirty |
| Boom Wear | Used |
| Arm Wear | Used |
| Bucket Teeth | Worn |
| Bucket Edge | Used |
| Track Pads | Worn |
| Track Links | Used |
| Sprocket | Worn |
| Idler | Used |
| Rollers | Dirty |
| Undercarriage Frame | Ok |
| Track Frame | Rusty |
| Counterweight | Present |
| Fuel Tank | Present |
| DEF Tank | Present |
| Exhaust | Present |
| Fan | Present |
| Hydraulic Pump | Present |
| Main Valve | Present |
| Pilot Valve | Present |
| Final Drives | Present |
| Leaks Hydraulic | No |
| Leaks Oil | No |
| Leaks Fuel | No |
| Leaks Coolant | No |
| Structural Cracks | No |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Worn |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Quick Coupler | Manual type |
| Key Features & Condition | Hydraulic Hammer Lines | Present |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Floor Covering | Worn |
| Operator Cabin Details | Cab Structure, Gard | Ok, no guard |
| Engine & Performance | Engine Cooling System | Present |
| Engine & Performance | Coolant | Bottle present |
| Engine & Performance | Leaks& seals | Minor possible |
| Exterior Condition & Visual Inspection | Engine Hood | Dirty |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Used |
| Exterior Condition & Visual Inspection | Boom Condition | Used, surface rust |
| Exterior Condition & Visual Inspection | Arm Condition | Used, worn |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded, worn |
| Hydraulic System | Hydraulic Leaks | No visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard width |
| Attachments | Status | Used, worn teeth |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Type | Rubber pads |
| Tracks Estimated Remaining Life % | Damages / Cuts | Muddy, worn |
Estimated Price
$10,100.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Colin W. Parker
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: David Huang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.