2023 SANY SY375H Crawler Excavator
Condition:Used
Hours:4202
Country:Chile
Overview
| Brand | Sany |
|---|---|
| Model | SY375H |
| Country | Chile |
| Year | 2023 |
| Hours | 4202 |
| Operating Weight | 37.5 Tons |
| Bucket Capacity | 1.9 m³ |
| Condition | Used |
| Supplier Name | Rodrigo Antonio Muñoz |
Product Description
This Sany 375H excavator was manufactured in September 2023, and I’ve inspected it carefully. The Isuzu 6HK1 engine is mounted upright under the chassis. The seals around the filter are dry, and there are no leaks around the fuel injector lines. The area around the swing motor is also dry. For a machine that has already run 4202 hours, the area around the swing motor is usually the first place to get damp, so I check those areas first.
Can’t see any oil rings under bottom rollers, they appear to be dry, idler does not appear to be damaged. The cab sits flat on the frame, the swing bearing is not obviously gone but again I’d want to get on it and test-drive before committing to any buying. oh and the guy that was operating it left a half eaten snack wrapper STUFFED in the cupholder, the floor mat was caked with mud, dust on the seat (no rips or tears though), no slop in the controls, the joysticks were tight, no sign of the bingo, bluetooth working, 4g connected, a/c blowing cold, and the screen was live and showing 4202 hours at the time of my visit. Valve cover dry. These were not run long enough to check temp, but did not smoke on start up and was idle sitting in a green zone at 2 liters an hour fuel use which is where it should be. Replace bucket teeth before operating the machine; bucket cutting edge rounds will be replaced with worn ones. Full scratches, cosmetic, on mostly clean painted upper is counterweight edge. When I got out there it was raining quite heavily and I couldn’t get under the tail to belly crawl wherever I wanted, but wherever I could reach was dry. The iron appears to be good for its age and time.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY375H |
| Made | 2023-09 |
| Fuel System | Common Rail |
| Emission | Stage 4 |
| EGR | Present |
| DPF | Present |
| DOC | Present |
| ECU | Present |
| Hours | 4,202 |
| Warning NO POWER | Yes |
| Warning EXH SYSTEM | Yes |
| Warning ESCAPE MODE | Yes |
| Monitor Screen | Ok |
| Rear Camera | Ok |
| Seat | Used |
| Joystick L | Present |
| Joystick R | Present |
| Cabin Floor | Dirty |
| Cabin Glass | Ok |
| Safety Labels | Present |
| Boom | Used |
| Arm | Used |
| Bucket | Rusty |
| Bucket Teeth | Worn |
| Paint | Good |
| Body Scratches | Minor |
| Track L | Rusty |
| Track R | Rusty |
| Track Frame | Rusty |
| Undercarriage | Rusty |
| Hydraulic Pump | Ok |
| Fuel Filter | Present |
| Vent Grille | Ok |
| Side Panel | Ok |
| Hood Latch | Ok |
| Engine Hose | Present |
| Engine Surface | Used |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Back Camera | Yes |
| Key Features & Condition | Camera Image | Foggy |
| Key Features & Condition | Quick Coupler | No, Pin-on |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat | Used |
| Operator Cabin Details | Headrest | Present |
| Operator Cabin Details | Control Levers | Present |
| Operator Cabin Details | Windows/Glass | Dirty |
| Operator Cabin Details | Dashboard Screen | On, readable |
| Operator Cabin Details | Warning Icon | Lit |
| Operator Cabin Details | Hour Meter | 4,202h |
| Operator Cabin Details | Fuel Econ Reading | 2L/h |
| Operator Cabin Details | Cab Structure | Ok |
| Operator Cabin Details | Armrest Box | Worn |
| Engine & Performance | Engine Model | Isuzu 6HK1 |
| Engine & Performance | Fuel Injection Type | Common Rail |
| Engine & Performance | Emission Stage | China IV |
| Engine & Performance | Manufacture Date | 2023-09 |
| Engine & Performance | Engine Bay | Dusty |
| Engine & Performance | Engine Hoses | Old |
| Engine & Performance | Turbo Hose | Red |
| Engine & Performance | Coolant Line | Present |
| Exterior Condition | Undercarriage | Rusty |
| Exterior Condition | Track Frame | Muddy |
| Exterior Condition | Track Pads | Worn |
| Exterior Condition | Sprocket | Worn |
| Exterior Condition | Idler | Worn |
| Exterior Condition | Body Paint | Faded |
| Exterior Condition | Rear Panel | Scratched, dented |
| Exterior Condition | Boom | Used, no crack seen |
| Exterior Condition | Arm | Used |
| Exterior Condition | Bucket | Attached |
| Exterior Condition | Bucket Teeth | Worn |
| Hydraulic System | Hydraulic Hose Brand | Sumitomo Riko |
| Hydraulic System | Hose Rating | 35MPa |
| Hydraulic System | Swing Motor | Present |
| Hydraulic System | Fittings | Stained |
| Hydraulic System | Mounting Bolts | Rusty |
| Attachments | Attachment Model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler Status | Pin-on |
| Tracks | Front Right Track | Worn |
| Tracks | Front Left Track | Worn |
| Tracks | Rear Right Track | Worn |
| Tracks | Rear Left Track | Worn |
| Tracks | Type | Steel |
| Tracks | Damage/Cuts | Muddy |
Estimated Price
$53,100.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Rodrigo Antonio Muñoz
Supplier Description:We mainly engage in the recycling and refurbishment of decommissioned mining machinery, especially loaders and small trucks for small and medium-sized mines.
Supplier address:*********** Vallenar, Atacama, Chile
Rodrigo Antonio Muñoz
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
View All Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.