2023 SANY SY75C Pro Crawler Excavator
Condition:Used
Hours:400
Country:Kyrgyzstan
Overview
| Brand | Sany |
|---|---|
| Model | SY75C Pro |
| Country | Kyrgyzstan |
| Year | 2023 |
| Hours | 400 |
| Operating Weight | 7.5 Tons |
| Bucket Capacity | 0.3 m³ |
| Condition | Used |
| Supplier Name | Рустам Асанов |
Product Description
I inspected this SY75C Pro at the dealer’s yard today. The tracks look almost brand new, with wear estimated at only 5% to 10% (or even less); the tread pattern is intact, and the edges of the track shoes show no signs of the rounded wear typically caused by prolonged operation. No-packed mud or grease buildup undercarriage, I mean really clean, hence it shows that it has spent less time with the dirt. Sprockets and idlers appear pristine, all the paint work on the sprockets on the rollers are all black and there is no bare metal visible between the paint. The blade is there too and the dozer is full width and has no gouges or ripped or bent edges to indicate that it’s been pushing rock or anything heavy.
We removed the engine cover and looked around the cylinder and pump areas—let’s see, I’ll have to go through my notes again—But nothing is soaking wet, no fresh oil is anywhere on the block or around the hydraulic pump, again, a Rexroth pump. Hoses have some dust on them, though, if it is just there sitting around dust then it’s not leaking fluid; the clamps are tight, and the spiral reinforced grey hoses don’t have any cracks or soft spots in them either. Inspected the manifold block with all of the ports and connections for any seepage of moisture and all were dry. The boom and stick are black painted and the chrome rods I was able to see appear to be completely clean (no signs of scoring or pitting) and the seals on the stick are clean with no weeping. Can’t see much of the make of the engine due to hoses, but it will not smoke and cranked up immediately by yard man when I asked him to do it. Runs smooth. All Glass without chips or cracks, Door Seals are good. It should have been there in the guy pocket as the operator’s manual goes but so what.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY75C Pro |
| Engine | Ok |
| Alternator | Present |
| Hoses | Used |
| Clamps | Present |
| Air Filter | Present |
| Fuel System | Ok |
| Hydraulic Pump | Present |
| Fittings | Ok |
| Lines | Used |
| Tracks | Good |
| Track Frame | Ok |
| Blade | Present |
| Blade Cylinder | Ok |
| Cab | Good |
| Glass | Ok |
| Seat | Present |
| Controls | Present |
| Joysticks | Ok |
| Display | Present |
| Paint | Good |
| Boom | Ok |
| Arm | Ok |
| Bucket | Present |
| Cylinders | Ok |
| Pins | Present |
| Hoses Routing | Ok |
| Cab Interior | Clean |
| Floor Mat | Present |
| Vents | Present |
| Safety Labels | Present |
| Engine Cover | Present |
| Side Panels | Ok |
| Counterweight | Present |
| Fuel Cap | Present |
| Hydraulic Tank | Present |
| Steps | Present |
| Handrails | Present |
| Lights | Present |
| Mirrors | Present |
| Wiper | Present |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Yes |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Stabilizer Blade Condition | Present |
| Key Features & Condition | Horn | Yes |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Warning alarms message | Present |
| Operator Cabin Details | Washer, Wipers | Ok |
| Operator Cabin Details | Air Conditioning & Heating System | Ok |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Engine & Performance | Coolant | Ok |
| Exterior Condition & Visual Inspection | Leaks& seals | Minor |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Ok |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers & Catwalk Condition | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Ok |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Hydraulic System | Exterior Paint Condition | Good |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Bucket Swing cylinder | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Used |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
Estimated Price
$17,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Рустам Асанов
Supplier Description:A seasoned individual supplier active in the Matrosov Machinery Trading District of Bishkek.
Supplier address:******** Bishkek, Kyrgyzstan
Рустам Асанов
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Brian Wu
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.