2025 SANY SY60C Mini Crawler Excavator
Condition:Used
Hours:1574
Country:USA
Overview
| Brand | Sany |
|---|---|
| Model | SY60C |
| Country | USA |
| Year | 2025 |
| Hours | 1574 |
| Operating Weight | 6.0 Tons |
| Bucket Capacity | 0.22 m³ |
| Condition | Used |
| Supplier Name | Robert Wilson |
Product Description
On this SY60C today outside of town at a dealer lot walked it and it has been sitting in some light rain, walking this car around right now everything smells slippery, if it does, it should be easier to see a fresh leak. Hour meter reads 1574 which for April ’25 build date would be not “abused”, but certainly “worked”. Kubota V2807 turbos started right away with no smoke from the pipe and idles nicely with no sign of diesel knock at idle with bad injectors, and the top of the engine is quite dirty but below the surface there is no oil; Amazin’ how much I found creeping down the walls of the pump housing when I looked at it again; No oil, dried out, old crud caked on the top. Alternator belt is tight, fuel filter housing isn’t stained and no cracks on the air intake hose etc (which is a source of problems on Chinese machines)
Road batter is on tracks, which indicates it has been working, not just just sitting on the market; free spinning rollers don’t wear a grinding noise like bearings that are terminated. There is wear on sprockets, but nothing to be concerned with, idlers are the same. When I noticed the controls block being coloured blue, I think after market/rebuild, but all the lines seem to be factory crimped, no hose clamps holding together bogging jobs and I ran them through full cycles boom and stick no drift when you’re holding position, no jerks when cylinders are extended, which means the valve spools aren’t worn out yet. This type of scoring found in bucket cylinder can be detected with your fingernail but is not leaking past the seals at this time, this is just cosmetic. Inside the cab is dirty, operator clearly didn’t maintain it (dust on the dashboard, dirt on the floor mats, dirty seat fabric but no rips) and the monitor display is actually pretty clean considering, shows all functions, no dead pixels. The joysticks aren’t filthy, pedals function and all the electrical gear tested by me comes on. Door seals appear to be intact; this is important because these cab’s will die when they get wet. Some yard rash and brush work chips on the boom, nothing structural to paint on the exterior has your usual yard rash and counterweight has some minor chips on the boom. The serial/tittle number plate is clear and corresponds to the documents they presented me with. This is a worked machine and not pristine, but the bones are solidly in place and I didn’t see anything that made me think that repairs were imminent and costly.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY60C |
| Exterior Paint | Good |
| Cabin Glass | Dirty |
| Operator Seat | Used |
| Rear Lights | LED Red Present |
| Tracks | Worn |
| Track Pads | Used |
| Bucket | Dirty Used |
| Bucket Teeth | Present Worn |
| Engine Bay | Dirty |
| Fuel Filter | Present |
| Air Filter | Present |
| Alternator | Present |
| Coolant Hoses | Present Old |
| Wiring Harness | Present |
| Hydraulic Pump | Blue Present |
| Hydraulic Lines | Multiple Present |
| Hydraulic Fittings | Present |
| Control Valve | Blue Present |
| Hydraulic Hoses | Black Present |
| Hour Meter | 1,574h |
| Fuel Gauge | Low |
| Temperature Gauge | Normal |
| Display Screen | Working |
| Control Buttons | 4 Present |
| Oil Level | Not Visible |
| Hydraulic Oil | Not Visible |
| Coolant Level | Not Visible |
| Grease Points | Not Checked |
| Safety Decals | Present |
| Warning Labels | Present |
| Fire Extinguisher | Not Visible |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Boom Hydraulic Check Valve | Ok |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Arm Hydraulic Check Valve | Ok |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | Present |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Stabilizer Blade Condition | Used |
| Operator Cabin Details | Seat and Arm Support | Used |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Dashboard Screen, Gauges | Working |
| Operator Cabin Details | Cab Floor Covering | Ok |
| Operator Cabin Details | Cab Structure, Gard | Ok, no guard |
| Operator Cabin Details | Electrical System | Ok |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Ok |
| Engine & Performance | Belts & Air/Oil Filters | Present |
| Engine & Performance | Coolant | Present |
| Engine & Performance | Leaks& seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Dirty |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers & Catwalk Condition | Ok |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Red LED ok |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Good |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Blue ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Hydraulic System | Bucket Swing cylinder | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Used |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
Estimated Price
$12,500.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Robert Wilson
Supplier address:*********** Houston, TX 77060, USA
Robert Wilson
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.