2015 KOBELCO SK210 Crawler Excavator
Condition:Used
Hours:8335
Country:Colombia
Overview
| Brand | Kobelco |
|---|---|
| Model | SK210 |
| Country | Colombia |
| Year | 2015 |
| Hours | 8335 |
| Operating Weight | 21 Tons |
| Bucket Capacity | 0.93 m³ |
| Condition | Used |
| Supplier Name | Juan Carlos Restrepo |
Product Description
This machine today on a muddy lot (some kind of demo lot) on the outskirts of the city, there’s some surface rust on the muffler’s body, which is obviously a result of the machine sitting out in the rain for a while, but when I opened the swing motor compartment, there is a bit of oil leakage around the motor housing, some dark oil deposits on the fittings and banjo connections, and a few dead leaves and debris mixed in with the oil film on the floor of the compartment, which means the leak was not new, but has been leaking for awhile, and no one bothered to clean the area up. On quartz meter, hours is 8335 which, for SK210 is in the mid life zone.
The other spot to point out (which is more relevant when checking out a check — it would be a gusher if it was an undercarriage leak, or someone else would notice it too!) is the hydraulic pump compartment on the right, with oil stain marks running down the exterior of the yellow part under the compartment opening — that means a hose plumbing leak or a pump seal tear, but not a gusher (right now in particular) and I’d want to test it for that if I bought it. Fuel gauge was on E (just above empty); work mode was stuck on H and coolant temp gauge was low since the machine was not running when we took the picture of the monitor. Both sides of the tracks are full of mud, and I don’t know the honesty factor for the number of shoes or sprocket teeth worn out on this machine; when I last used it, the bottom was pretty much full of mud and you should clean it up slowly. Joystick boots still there with no tears, grab rail on right side still remains solid and warning stickers on console as In the engine bay seems ok. Any problems with the swing motor should be addressed. Have a hydraulic test performed. Wipe undercarriage looking for dirt prior to inspection. Pass or fail; it is just a matter of knowing what you’re buying.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | KOBELCO |
| Model | SK210 |
| Hour Meter | 8335 |
| Paint | Faded |
| Body | Dirty |
| Cab Glass | Dirty |
| Seat | Used |
| Floor Mat | Dirty |
| Control Lever | Old |
| Monitor Display | Ok |
| Engine Cover | Yes |
| Air Filter | Dirty |
| Engine | Present |
| Radiator | Dirty |
| Cooling Hoses | Old |
| Hydraulic Pump | Present |
| Hydraulic Lines | Multiple |
| Oil Filter | Dirty |
| Hydraulic Tank | Present |
| Main Control Valve | Present |
| Travel Motor | Present |
| Track Shoes | Worn |
| Track Links | Used |
| Sprocket | Worn |
| Idler | Ok |
| Rollers | Dirty |
| Boom Cylinder | Present |
| Arm Cylinder | Present |
| Bucket Cylinder | Present |
| Hydraulic Hoses | Old |
| Bucket Teeth | Worn |
| Bucket Edge | Used |
| Pin Bushings | Worn |
| Grease Fittings | Dirty |
| Work Site | Muddy |
| Ground Condition | Wet |
| Other Equipment | CAT Visible |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Faded |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Back camera | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Hydraulic Hammer Lines | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Horn | Yes |
| Operator Cabin Details | Seat and Arm Support | Old |
| Operator Cabin Details | Cab Doors & covers | Dirty |
| Operator Cabin Details | Control Levers, Control Stick | Present |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Cab Floor Covering | Very dirty |
| Operator Cabin Details | Cab Structure, Gard | Ok, no guard |
| Engine & Performance | Engine Model | Unknown |
| Engine & Performance | Engine Cooling System | Present |
| Engine & Performance | Exhaust System & Muffler | Rusty |
| Engine & Performance | Belts & Air/Oil Filters | Dusty |
| Engine & Performance | Leaks& seals | Minor leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Very muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Present |
| Exterior Condition & Visual Inspection | Side Access Doors | Open |
| Exterior Condition & Visual Inspection | Steps and Handrails | Dirty |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Present |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Present |
| Hydraulic System | Hydraulic Pump & Valve Block | Present |
| Hydraulic System | Bucket Hydraulic Jack | Present |
| Hydraulic System | Arm Hydraulic Jack | Present |
| Transmission & drive train | Swivel Joint | Present |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Track Type | Steel crawler |
| Tracks Estimated Remaining Life % | Track Pads | Worn |
| Tracks Estimated Remaining Life % | Damages / Cuts | Muddy |
Estimated Price
$15,700.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Juan Carlos Restrepo
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Justin Yang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.