2017 Kobelco SK200 Crawler Excavator
Condition:Used
Hours:4700
Country:China
Overview
| Brand | Kobelco |
|---|---|
| Model | SK200-12 |
| Country | China |
| Year | 2017 |
| Hours | 4700 |
| Operating Weight | 20 Tons |
| Bucket Capacity | 0.8 m³ |
| Condition | Used |
| Supplier Name | Liu Jie |
Product Description
I inspected this machine on site today, Kobelco SK200 with the Hino J05E-TA under the hood, turquoise paint job faded but that’s not what matters here. Ran it through full cycles and the hydraulics respond quick enough, both joysticks feel tight, no slop in the controls which is honestly better than half the stuff I see roll through these lots. Boom and stick have surface rust yeah but that’s cosmetic, cylinders aren’t weeping anything fresh, I got under there and checked the rod seals—wait let me clarify that, went back and looked at the swing motor area again because there was debris piled up, just old leaves and dirt, no oil pooling anywhere which is the main thing. Undercarriage is caked in mud from site work obviously, couldn’t get a perfect read on every link but nothing looked cracked or about to let go.
Cab is dirty, operator clearly wasn’t keeping it clean, there’s a plastic basin on the floor with dried mud in it, checkered floor mats are filthy, couple drink bottles rolling around, but the seat’s intact and the glass is all there including rear window. Two side mirrors present. Fire extinguisher mounted where it should be. It was foggy during the inspection so visibility wasn’t perfect but I got what I needed. Bucket is a standard dig bucket, cutting edge is worn like you’d expect, nothing unusual there. Hydraulic hoses in the engine bay look dry on a few lines, not cracked open but they’re aging, might want to budget replacements in the next year if you’re running it hard. Pins feel tight when I cycled the boom, no excessive play at the stick connection. Machine digs clean. No stuttering. Pump sounds fine. Honestly for the price range these SK200s sit in, this one’s average to slightly above—nothing’s grenaded, no frame cracks, engine isn’t blown, hydraulics work. You’ll need to clean it and probably swap some hoses soon but it’ll run. Not a basket case. Not a cream puff either. Just a work machine that worked.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | Kobelco |
| Model | SK200-12 |
| Paint | Faded |
| Cab Glass | Dirty |
| Seat | Used |
| Floor Mat | Dirty |
| Controls | Present |
| Joysticks | Worn |
| Pedals | Old |
| Fire Extinguisher | Present |
| Bucket | Worn |
| Boom Cylinder | Ok |
| Arm Cylinder | Ok |
| Hydraulic Hoses | Old |
| Quick Coupler | Present |
| Tracks | Worn |
| Track Pads | Used |
| Idler | Ok |
| Sprocket | Worn |
| Undercarriage | Dirty |
| Engine Cover | Present |
| Engine Access | Ok |
| Diesel Filter | Present |
| Oil Filter Label | Faded |
| Hydraulic Tank | Ok |
| Control Valves | Present |
| Swing Motor | Ok |
| Travel Motor | Ok |
| Breaker Lines | Present |
| Auxiliary Lines | Present |
| Safety Decals | Faded |
| Warning Labels | Present |
| Fuel Tank | Ok |
| Battery | Present |
| Wiring Harness | Old |
| Counterweight | Ok |
| Turntable | Ok |
| Boom Wear Pads | Worn |
| Arm Wear Pads | Worn |
| Pins Bushings | Worn |
| Grease Points | Dirty |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Worn |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Used |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Dashboard Screen, Gauges | Ok |
| Operator Cabin Details | Cab Floor Covering | Dirty |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Engine & Performance | Fuel Injection Type | Electronic |
| Engine & Performance | Engine Model | Isuzu J05E-TA |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Used |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks & seals | None visible |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Steps and Handrails | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | None visible |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Used |
| Limited Functional Testing & Operation | Arm Pins Condition | Used |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | Digging bucket |
| Attachments | Size | Standard |
| Attachments | Status | Worn |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Track Shoes | Worn |
| Tracks Estimated Remaining Life % | Track Type | Steel |
| Tracks Estimated Remaining Life % | Damages / Cuts | Muddy |
Estimated Price
$18,700.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Liu Jie
Supplier Description:High-standard refurbishment of used Caterpillar/Komatsu excavators and wholesale of used parts.
Supplier address:**************Gulou District, Xuzhou City, Jiangsu Province
Liu Jie
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Kevin Chen
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.