2020 SANY SY75C Crawler Excavator
Condition:Used
Hours:3400
Country:China
Overview
| Brand | Sany |
|---|---|
| Model | SY75C |
| Country | China |
| Year | 2020 |
| Hours | 3400 |
| Operating Weight | 7.5 Tons |
| Bucket Capacity | 0.32m³ |
| Condition | Used |
| Supplier Name | Huang Xinhua |
Product Description
This time, I inspected a newly arrived 2020 Sany 75C.First thing I did was pop the hood (I always start from the engine ask you!) and all stuff around the block looked dry, not much oil staining around the valve cover and no oil staining anywhere near the injection pump; fuel lines all intact with no weepers at the fuel fittings, alt and starter both present and looked like they had not been replaced in an emergency, which is good because it means nothing has been swapped out in a rush! Not smoking. The hydraulic pump — axial piston type — shaft seal was dry, and the main control valve body (with all those blue painted spool bodies and swaged fittings) was clean as well, there were no emergency splices or rerouting made in there as evidenced by the red and blue paint dots on the port markings.
I’m not going to mincing my words here, but the hours on this machine are displayed lower down. The sprocket teeth are rounded off, the sharp tooth profile is long gone, the link rail surfaces are worn flat and oxidized, the track pitch has stretched out reduce the amount you have – perhaps more if you are on hard ground – and one shoe on the front left is no longer straight and its shape at the idler end is worn out – you don’t want to run any harder ground while this shoe is still on before taking the shoe off. Track sag is loose. The close-ups show no real cushion in the pins and bushings which are metal to metal. The entire lower is complete, glass in place all around (no cracks I could see from the outside), the body is black and the upper frame is yellow. Chipping on the lower part of the tail swing is getting pretty worn and the reflector sticker in that area is half peeled off — only cosmetic. Not a bad machine. Be aware of the product that you are purchasing.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | Sany |
| Model | SY75C |
| Paint | Faded |
| Rear Bumper | Damaged |
| Tail Light | Cracked |
| Cab Glass | Dirty |
| Cab Frame | Used |
| Boom | Used |
| Arm | Used |
| Bucket | Worn |
| Bucket Teeth | Worn |
| Blade | Worn |
| Undercarriage | Muddy |
| Track Chain | Dirty |
| Track Shoes | Worn |
| Idler Wheel | Muddy |
| Sprocket | Dirty |
| Travel Motor | Dirty |
| Final Drive | Present |
| Hydraulic Valve Block | Present |
| Valve Block | Good |
| Hydraulic Hoses | Used |
| Hose Fittings | Marked |
| Hydraulic Pump | Present |
| Pump Housing | Dusty |
| Oil Leak | None Visible |
| Engine Bay | Dirty |
| Injection Pump | Present |
| Injector Lines | Old |
| Starter Motor | Present |
| Alternator | Present |
| Oil Filter | Present |
| Wiring | Dusty |
| Rust | Present |
| Overall Wear | Heavy |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | No |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Automatic Lubrication System | No |
| Key Features & Condition | Quick Coupler | No |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Key Features & Condition | Dozer Blade | Yes |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors & Covers | Ok |
| Operator Cabin Details | Windows and Mirrors | Dirty |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Engine & Performance | Fuel Injection Type | Mechanical |
| Engine & Performance | Engine Brand | SANY |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Dirty |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Leaks & Seals | Leaks & Seals | Minor leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Bumpers Condition | Scratched, Dented |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Lights | Ok |
| Exterior Condition & Visual Inspection | Battery Check | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded |
| Hydraulic System | Hydraulic Leaks | Minor |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Ok |
| Hydraulic System | Mono Boom Jack | Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & Drive Train | Swivel Joint | Ok |
| Undercarriage | Track Shoes | Worn |
| Undercarriage | Track Chain | Dirty |
| Undercarriage | Idler Wheel | Muddy |
| Undercarriage | Sprocket | Worn |
| Undercarriage | Final Drive | Dirty |
| Attachments | Attachment Model | Digging Bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler Status | Pin-on |
Estimated Price
$11,000.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Huang Xinhua
Supplier Description:Personal brokerage and refurbishment services for used bulldozers, road rollers and dump trucks.
Supplier address:*********** Zixing City, Chenzhou City, Hunan Province
Huang Xinhua
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Kevin Chen
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.