2022 SANY SY75C Crawler Mini Excavator
Condition:Used
Hours:500
Country:Kazakhstan
Overview
| Brand | Sany |
|---|---|
| Model | SY75C |
| Country | Kazakhstan |
| Year | 2022 |
| Hours | 500 |
| Operating Weight | 7.5 Tons |
| Bucket Capacity | 0.28 m³ |
| Condition | Used |
| Supplier Name | Komek Machinery Kazakhstan |
Product Description
I visited the site today to inspect this SANY SY75C excavator (operating weight of approximately 7.5 tons). Opening the engine hood reveals an Isuzu engine, which is the standard configuration for this model. When I arrive, the engine bay is opened and, to be honest, does not appear to be quite as bad as some I have seen: Voluntary alternator leaks have been replaced, no oil mist on firewall, hoses are BOTONG brand that I’ve seen hold up pretty well. Starts cold (no white smoke) runs smoothly on idle and didn’t get hot as sitting around for 30 minutes to explore underneath.
There is old grease and oil film on all the fittings/pump area all dirty to sure in pictures but only shop dirt as nothing is leaking, there are rolls of surface rust on the rods of cylinders, that’s because it has been sitting for some time and or in wet dirt, there is no scoring that I can see and cylinder seals are not weeping. Some chroming has been affected with this, but the bucket cylinder is the same and there is no deep chrome pitting. Pins are tight. Even though it was just on a few occasions, there was no “slop” in the stick or boom, and there is a crisp response from the body that isn’t mushy like a tired pump would be.Inside is basically new for Cabin’s, the plastic is all still on the seat, which is weird because it’s a used machine but I guess maybe it’s a recent refurb of the original or dealer stock etc etc, the floor mat is still in perfect condition, all all the dust boots on the joysticks are still present, and I guess rentals have a lot more wear on the glass than Cabin’s have.
Product Condition Checklist
| Item | Condition |
|---|---|
| Brand | SANY |
| Model | SY75C |
| Cab Glass | Good |
| Seat | Present |
| Controls | Wood Trim |
| Floor Mat | Red |
| Safety Label | Present |
| Engine Cover | Dirty |
| Tracks | Worn |
| Track Pads | Used |
| Idler Wheel | Rusty |
| Drive Motor | Present |
| Undercarriage | Dirty |
| Hydraulic Hoses | Old |
| Valve Block | Dirty |
| Engine | Present |
| Alternator | Present |
| Fuel Filter | Red |
| Air Filter | Present |
| Radiator Hose | Orange |
| Boom Cylinder | Yellow |
| Arm Cylinder | Present |
| Bucket Cylinder | Present |
| Bucket Teeth | Worn |
| Bucket Pin | Present |
| Quick Couple | Present |
| Upper Frame | Dirty |
| Lower Frame | Rusty |
| Paint | Faded |
| Decals | Present |
| Intelligent Control | Yes |
| Vent Holes | Dirty |
| Track Frame | Rusty |
| Center Joint | Greased |
| Oil Leak | No |
| Fuel Leak | No |
Detailed Inspection & Specification Report
| Category | Item | Condition |
|---|---|---|
| Key Features & Condition | Safety Certification Label | Present |
| Key Features & Condition | Adjustable Boom System | No |
| Key Features & Condition | Quick Coupler | Yes |
| Key Features & Condition | Grapple and Shear Hydraulic Lines | No |
| Key Features & Condition | Mono Boom | Yes |
| Operator Cabin Details | Seat and Arm Support | Ok |
| Operator Cabin Details | Cab Doors & covers | Ok |
| Operator Cabin Details | Control Levers, Control Stick | Wood trim, Ok |
| Operator Cabin Details | Windows and Mirrors | Ok |
| Operator Cabin Details | Cab Floor Covering | Red mat, Dirty |
| Operator Cabin Details | Cab Structure, Guard | Ok, no guard |
| Engine & Performance | Engine Model | Isuzu |
| Engine & Performance | Engine Cooling System | Ok |
| Engine & Performance | Exhaust System & Muffler | Present |
| Engine & Performance | Belts & Air/Oil Filters | Ok |
| Engine & Performance | Coolant | Ok |
| Engine & Performance | Leaks & seals | No visible leaks |
| Exterior Condition & Visual Inspection | Main Frame & Track Frame | Muddy, Rusty |
| Exterior Condition & Visual Inspection | Protective Covers & Sheets | Ok |
| Exterior Condition & Visual Inspection | Engine Hood | Ok |
| Exterior Condition & Visual Inspection | Side Access Doors | Ok |
| Exterior Condition & Visual Inspection | Boom Condition | Used |
| Exterior Condition & Visual Inspection | Arm Condition | Used |
| Exterior Condition & Visual Inspection | Counterweight | Ok |
| Exterior Condition & Visual Inspection | Exterior Paint Condition | Faded, Dirty |
| Hydraulic System | Hydraulic Leaks | No |
| Hydraulic System | Boom Hydraulic Jack | Ok |
| Hydraulic System | Hydraulic Pump & Valve Block | Dirty, Ok |
| Hydraulic System | Bucket Hydraulic Jack | Ok |
| Hydraulic System | Arm Hydraulic Jack | Ok |
| Transmission & drive train | Swivel Joint | Ok |
| Limited Functional Testing & Operation | Boom Pins Condition | Worn |
| Limited Functional Testing & Operation | Arm Pins Condition | Worn |
| Limited Functional Testing & Operation | Bucket Pins Condition | Worn |
| Attachments | Attachments model | GP bucket |
| Attachments | Size | Standard |
| Attachments | Status | Used |
| Attachments | Coupler status | Pin-on |
| Tracks Estimated Remaining Life % | Size | 400mm |
| Tracks Estimated Remaining Life % | Type | Rubber pad |
| Tracks Estimated Remaining Life % | Damages / Cuts | Worn, Muddy |
Estimated Price
$16,300.00
Note: “This price does not include export duties and shipping costs. Please consult the supplier for specific transaction procedures and details.”
The supplier of this machine
Supplier Name:Komek Machinery Kazakhstan
Supplier Description:Komek Machinery is the officially authorized distributor of Komatsu and Bomag in Kazakhstan.
Supplier address:********** Karaganda, 100004, Kazakhstan
Komek Machinery Kazakhstan
All customer reviews on the entire website
Customer photos and videos
Cody Hayes
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
Mark Davies
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it's been making us money ever since.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Bilal Qureshi
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
Dereje Alemu
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.
Godfrey Mugisha
The shipment from korea to Uganda took a little over four weeks, slightly longer than I was initially told, but the platform sent me weekly photo updates showing the machine's location on the ship, so I never worried about losing money. The machine arrived in perfect condition, and the short wait was worthwhile. Overall, I'm very satisfied.
Samir Haddad
We found a Volvo EC240 excavator at a very good price for our new residential project. The seller even uploaded complete maintenance records from the previous owner, saving us the cost of hiring an independent inspector and flying in to check the machine's condition. This alone saved us over $800 in travel expenses.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Lars Knudsen
The team here truly understands the procurement process of construction companies—they won't bombard you with sales calls after you submit an inquiry, but will send you the specifications, prices, and inspection documents you require within an hour. 10/10, they will be our first choice for all future upgrades and replacements of our excavator fleet.
Sorry, no reviews match your current selections
Related Products
Sales Consultant
About the Author: Michael Wang
Picked up one 2025 CAT 320D2 for a highway expansion job we just won out in Texas. Was worried about the hours being rolled back because you see that everywhere now but our shop foreman plugged in the laptop and ECM matched the dash exactly. Good solid iron.
I’m a one man show doing septic tanks and grading. Rented forever until I found a Kubota U35 here. Wth financing rates right now I needed a cash deal. Got a great price. Rubber tracks are almost new. Starts every morning no problem.
My guys have been running the Volvo EC210D we got off here for about 400 hours now. Zero downtime. The inspection report noted a slight weep on the bucket cylinder which I appreciated Equipment auditors on the machdealers platform telling me upfront. Repacked the cylinder for $150 and it’s been making us money ever since.
Load a lot of containers for West Africa out of different ports. Best thing about machdealers platform is they get the export docs right the first time. Commercial invoice, packing list, title. No delays at Jebel Ali Port Customs. Bought 4 KOMATSU PC200-8 from them so far.
We run a basalt quarry site in Central Ethiopia, we needed a 36 ton heavy excavator that can run 24/7 loading rock. Found a used KOMATSU PC 350 on here, after 3 weeks non stop continuous operation on site, engine temperature stayed normal all the time. That machine takes so much beating on our rocky ground, no issues at all. Exactly the tough workhorse we needed.